DESIGN OF ROLLOVER TEST-BED FOR HEAVY VEHICLES
Journal Title: Frontiers in Manufacturing Engineering (FME) - Year 2018, Vol 2, Issue 1
Abstract
Heavy vehicles rollover has become an important damage to life, property, and safety issues. For the problem of heavy vehicles side pour stability is poor, a rollover test bed is designed for the measurement of stable roll angle, the test-bed is consist of mechanical device, hydraulic lift liters system, measurement and warning system, and security protection device, meet GB/T14172-2009; for different side turned angle, force analysis about rollover test-bed is done, maximum lift liters thrust that needed by hydraulic system, which provides the basis for the design of the hydraulic system, hydraulic cylinders and hydraulic pump.
Authors and Affiliations
Zhiguo Zhao, Min Chen, Chao Wang
Keywords
Related Articles
- EP ID EP404439
- DOI 10.26480/fme.01.2018.01.03
- Views 57
- Downloads 0
FORCE MODELING OF MICRO END GRINDING OF HARD AND BRITTLE MATERIALS
Hard and brittle materials have broad application prospects in the defense, machinery and other fields, but hard machinability is crucial for its application. A promising processing method-micro end grinding (MEG), is p...
A HYBRID GENETIC ALGORITHM TO SOLVE MULTI-OBJECTIVE FUZZY FLEXIBLE JOB SHOP SCHEDULING PROBLEM
In this paper, a hybrid genetic algorithm is introduced to overcome the toughest combinatorial optimization problem, the fuzzy-flexible job-shop scheduling. In consideration of the multi-product-and- small-batch producti...
DATA ACQUISITION AND PROCESSING TECHNOLOGY FOR FLIGHT SIMULATOR DATA PACKAGE
In this paper, we present the data acquisition and processing technology for the flight simulator data package, which is the key stage for the development of the flight simulator data package. It is important to cooperat...
APPLICATION OF ADAPTIVE FUZZY SLIDING MODE CONTROL TO ALTERNATING CURRENT SERVOMOTOR SYSTEM
In the use of servo motor control system, some characteristics of motor, such as non-sinusoidal flux of motor mover caused by end effect, nonlinear friction, will make the effects of the servo system bad. So we must use...
FEMTOSECOND LASER SINGLE PULSE AND PULSE TRAINS ABLATION OF COPPER
The formation of nanostructures induced by femtosecond (fs) laser single pulse and pulse trains on copper (Cu) were systematically investigated. We found that the ablation size increases with the increasing of laser puls...