Ablation morphologies of different types of carbon in Carbon / Carbon composites
Journal Title: Carbon - Science and Technology - Year 2010, Vol 3, Issue 1
Abstract
No Abstract
Authors and Affiliations
Jian Yin, Hongbo Zhang, Xiang Xiong, Jinly Zuo
Keywords
Related Articles
- EP ID EP49881
- DOI -
- Views 248
- Downloads 0
Experimental studies on improving the performance of electrochemical machining of high carbon, high chromium die steel using jet patterns
Electrochemical machining (ECM) is a non-traditional process used mainly to cut hard or difficult-to-cut metals, where the application of a more traditional process is not convenient. Stiff market competition and ever-gr...
Development of new metal matrix composite electrodes for electrical discharge machining through powder metallurgy process
Electrical discharge machining (EDM) is one of the widely used nontraditional machining methods to produce die cavities by the erosive effect of electrical discharges. This method is popular due to the fact that a relati...
Effect of thermoplastic polyurethane content on properties of PC/TPU blend filled with Montmorillonite
The present study was taken up to investigate the effect of addition of Montmorillonite (MMT) to Poly carbonate/Thermoplastic polyurethane (PC/TPU) blends. A master batch of PC/MMT (70/30) was prepared using Hake Rheomix...
Removal of cationic surfactant (CTAB) from aqueous solution onto activated carbon obtained from corncob
Direct and indirect releases of large quantities of surfactants to the environment may result in serious health and environmental problems. Therefore, surfactants should be removed from water before water is released to...
Effect of heat treatment on MnxZn(1-x)Fe2O4 nanoparticles prepared by mechanochemical method using metal oxides
Nanoparticles of MnxZn(1-x)Fe2O4 where x = 0.625, 0.65 and 0.675 with grain size ranging between 15 nm – 25 nm were prepared by novel technique employing low temperature autocombustion. XRD, IR and TEM techniques were us...