About weldability and welding of Al alloys: case study and problem solving
Journal Title: Journal of Achievements in Materials and Manufacturing Engineering - Year 2017, Vol 2, Issue 85
Abstract
Purpose: Among many disciplines within engineering, welding is probably one of the most inexact – rather more of an art than a science. As weldment is meant the complete joint comprising the weld metal, heat affected zones (HAZ) and the adjacent parent metal and should have the same properties as the parent metal. This paper aims provides a basic understanding of the metallurgical principles involved in how aluminium alloys achieve their strength and how welding can affect these properties. The most important and applied welding processes to Al alloys are here shortly introduced, as well as the preparation of parent metals prior to welding and good welding practice to avoid and/or keep under control defects and failures. Some case studies with possible failures will be introduced together with actions and suggestions to solve the observed problems. Design/methodology/approach: Two sheets of the EN AW 5454 (AlMg3Mn) alloy were weld with resistance welding process and after a mechanical processing of lamination was observed the presence of the defect. The microstructure of the defect as well as the welded part were evaluated with stereomicroscope (LEICA MS5), optical microscope (LEICA MEF4M), and with SEM analysis (LEO 1540 VP equipped with an energy dispersive X-ray spectroscope Oxford Link Pentafet). Findings: The well welded part was analysed with optical microscopy and electronic microscopy resulting with the attended mechanical properties. Micro-hardness indentations on the joint demonstrated the good mechanical properties of the joint while with the microscopic observations were identified the orientation and presence of precipitates typical of this alloy. In the defect, microscopically observations showed the presence of oxide inclusions. Research limitations/implications: There are a number of problems associated with the welding of aluminium and its alloys that make it difficult to achieve this ideal. The features and defects that may contribute to the loss of properties comprise the following: gas porosity, oxide inclusions and oxide filming, solidification (hot) cracking or hot tearing, reduced strength in the weld and HAZ, lack of fusion, reduced corrosion resistance and reduced electrical resistance. Originality/value: This case study illustrated clearly the importance of the cleaning on the surfaces to obtain a well welded joint ensuring the desired mechanical properties.
Authors and Affiliations
E. Fracchia, F. Gobber, M. Rosso
Keywords
Related Articles
- EP ID EP254121
- DOI 10.5604/01.3001.0010.8036
- Views 107
- Downloads 0
Preparation of biomimetic superhydrophobic coating on mild steel
Purpose: Superhydrophobic surface has many special functions and is widely investigatedby researchers. Mild steel is one among the practice metals and plays an importantrole in all industrial applications. In this work,...
Numerical analysis of friction welded titanium joints
Purpose: Friction welding is found to be a suitable candidate for joining the dissimilarmaterials. Numerical model would be helpful for proper selection of processing conditions.In the present work, a thermo-mechanical m...
Enhancing bio-gas production from kitchen waste using BSA-iron oxide nanoparticles in miniature level bio-reactor
Purpose: This study focuses on increasing production of biogas as an alternative energyfrom biodegradable wastes (BWs) using BSA coated iron oxides nanoparticles, in view ofsolving waste management at household level. Ma...
Investigation of mechanical properties of MIG-brazed DP600 steel plates using different arc voltage
Purpose: In this study, the joinability of dual-phase automotive steel sheets by metal inertgas brazing method was aimed. DP 600 (Dual Phase) steel plates having 1 mm thicknesswere joined by copper-based (CuAl8) wire in...
Situational model of technological operations for secondary metallurgy
Purpose: The aim of this study was development of a computer situational model of heat and power processes and transport operations for secondary steelmaking (SSM) to evaluate the effectiveness of the proposed SSM energy...