Advanced oxidation and adsorption modification of dust waste from standard moulding sands
Journal Title: Archiwum Odlewnictwa - Year 2010, Vol 10, Issue 2
Abstract
The article discusses the process of advanced oxidation (AO) with application of ultrasounds and surface modification of the dust waste collected during dry dedusting of processed moulding sands with bentonite binder. A beneficial effect of both AO and adsorption modification of dust waste, when performed with the selected type of polyelectrolyte, on the technological and mechanical properties of moulding sands prepared with an addition of this dust has been stated. In spite of the bentonite content in moulding sand reduced by 43% and replaced with modified dust waste, the mechanical properties, i.e. the compression and tensile strengths, examined on sand specimens have been improved by 10% and 13%, respectively, with no harm to other basic technological sand properties. At the same time, it was also possible to reduce by about 30% the emission rate of the main gaseous component from the BTEX group, i.e. benzene.
Authors and Affiliations
A. Baliński
Keywords
Related Articles
- EP ID EP71725
- DOI -
- Views 148
- Downloads 0
Weld microstructure in cast AlSi9/SiC(p) metal matrix composites
Welded joint in cast AlSi9/SiC/20(p) metal matrix composite by manual TIG arc welding using AlMg5 filler metal has been described in his paper. Cooling curves have been stated, and the influence in distribution of reinfo...
Studies of selected mechanical properties of nitinol – shape memory alloy
Because of their specific properties, shape memory alloys are applied in many domains. The investigations were conducted on nitinol alloy in the form of 3,1 mm diameter wire, whose Af temperature as stated by the manufac...
Applying RP-FDM Technology to Produce Prototype Castings Using the Investment Casting Method
The research focused on the production of prototype castings, which is mapped out starting from the drawing documentation up to the production of the casting itself. The FDM method was applied for the production of the 3...
Advanced oxidation and adsorption modification of dust waste from standard moulding sands
The article discusses the process of advanced oxidation (AO) with application of ultrasounds and surface modification of the dust waste collected during dry dedusting of processed moulding sands with bentonite binder. A...
Ecological aspects of the use of lost foam patterns
The paper discusses some aspects of ecology in the use of lost foam patterns for piece production of large castings poured from ferrous alloys under the conditions of Metalodlew SA. Foundry. The technological processes u...