AGEING RESEARCH OF BARRIER MATERIALS
Journal Title: Proceedings of Electrotechnical Institute Prace Instytutu Elektrotechniki - Year 2012, Vol 59, Issue 259
Abstract
In the paper research over influence of temperature and humidity on to surface resistance of barrier material has been shown. Those materials are composites consisting of polypropylene substrate in the form of nonwoven fabric coated with metallic layers. Metallic layers were made with pulls magnetron sputtering method with targets made of zinc-indium with composition by weight 80%Zn-20%In and titanium. Ageing research was made in climatic chamber type PL-1KPH. This chamber enables control of temperature with accuracy of ±0,4C and humidity with accuracy of ±2,5%. Composite materials were aged in two temperatures 23C and 40C, and relative humidity was changed from 20% to 90%. Surface resistance measurements were made with RLC bridge with 1 kHz frequency. Measurements were made after 24 hours from settling of parameters. It was found that for both composite materials value of surface resistance does not change up to 60% of relative humidity. For relative humidity over 60% increase of surface resistance value has been noted. It was found also that temperature has significant influence on the surface resistance value of composite material with 80%Zn-20%In layer.
Authors and Affiliations
Krystian KRAWCZYK, Jan ZIAJA
AGEING RESEARCH OF BARRIER MATERIALS
In the paper research over influence of temperature and humidity on to surface resistance of barrier material has been shown. Those materials are composites consisting of polypropylene substrate in the form of nonwoven f...
LEDs OPTICAL RADIATION HAZARD
In the paper, on the basis of literature reports and own researches of the optical radiation of LEDs, the photobiological risks were estimated. The evaluation was made on the basis of standard PN-EN 62471 “Photobiologica...
EFFECTIVENESS OF RESIDUAL CURRENT DEVICES IN CIRCUITS OF ELECTRICAL INSTALLATIONS WITH FREQUENCY CONVERTERS
Commonly used in low voltage installations Residual Control Devices are the protective devices capable of detecting low leakage, ground or shock currents, but under certain conditions their trigger threshold may be signi...
PRZEPŁYW POWIETRZA W PRZEMYSŁOWYM UKŁADZIE WENTYLACYJNYM
Urządzenia klimatyzacyjne są produkowane w bardzo dużych ilościach i należy dążyć do zmniejszenia poboru mocy ich siłowników. Zużycie energii przez siłowniki zależy od wymiarów przepustnic i w pewnym stopniu od nacisku p...
METODA TWORZENIA MODELU ZIEMSKIEGO POLA MAGNETYCZNEGO ZOPTYMALIZOWANEGO DLA OBSERWATORA ORIENTACJI SATELITY
Jedna z metod określania orientacji przestrzennej małych satelitów orbitujących wokół Ziemi polega na jej odtwarzaniu poprzez porównywanie pomiarów pola magnetycznego oraz kierunku położenia słońca z odpowiednimi modelam...