Alternative technology to manufacture bimetallic products by using self-propagating high temperature synthesis
Journal Title: Журнал інженерних наук - Year 2017, Vol 4, Issue 2
Abstract
Electric welding is usually used for surfacing metal products. This process may be laborious and timeconsuming, which at the same time excludes welding jointing throughout the product surface. The productivity of powder tape surfacing is pretty low, up to 2.7 kg / h, with a melting rate of 13-15 min / h. The use of the selfpropagating high-temperature synthesis for producing a liquid thermite alloy aimed at further surfacing throughout the metal surface of a detail can provide a cost-effective and viable alternative technology for manufacturing bimetallic products.
Authors and Affiliations
I. E. Skidin, V. T. Kalinin, V. V. Tkach, L. N. Saitkhareiev, O. M. Zhbanova
Keywords
Related Articles
- EP ID EP249101
- DOI 10.21272/jes.2017.4(2).b7
- Views 52
- Downloads 0
Influence of the Wall Thickness Value on the Cross Wall Thickness Deviation of Tubes Rolled on the Tube Rolling Plant with the Continuous Mill
The high requirements as to accuracy of the wall thickness are due not only to necessity of assuring the reliability and serviceability of equipment, but also to the trend towards the continuous decrease of metal capacit...
Spline shaft hob cutter accuracy increase by the means of theoretical profile approximation by the circle involute section
One of the most wide spread and efficient spline shafts manufacturing methods is their cutting by the means of generating process by hob cutters. In this case, hob cutter’s theoretical profile, taking in to account its i...
Mathematical Modeling of the Mechanical Characteristic of the Activated PTFE-Matrix Using the Method of Planning the Experiment
In this paper, the influence of the parameters of the technological process of mechanical activation on the physical characteristics of the polytetrafluoroethylene (PTFE) matrix is investigated. The paper presents a math...
Overview of Control Techniques for Multicellular Converter
The structure multicellular converters, which appeared at the beginning of the 1990s, makes it possible to share the constraints in tension and it also improves the harmonic contents of the wave forms. To benefit as well...
Profile Gear Grinding Temperature Reduction and Equalization
The profile gear grinding modes definition technique is developed to provide the uniform residual temperatures after heating and subsequent cooling which predetermine uniform thermal deformations on periphery of a cogwhe...