Production of porous sintered materials using wastes of manufacturing engineering in self – propagating high-temperature synthesis
Journal Title: Журнал інженерних наук - Year 2016, Vol 3, Issue 1
Abstract
The increasing amount of wastes produced by the manufacturing engineering, as well as their physical and mechanical properties and restorability provide a search for sphere of their application. The actual problem of modern science is the utilization of wastes and using them in further production that will minimize their harmful impact on the environment and reduce the cost of expensive raw materials. Wastes are ideally suitable for the manufacture of porous permeable materials (filters). Powder metallurgy allows obtaining products with controlled filtration, physical and mechanical properties. Such materials are good filters for regeneration of technical liquids, oils, cooling fluids, sewage etc. The article analyzes the methods and technologies for the manufacture of porous ceramic materials and a new technology for their manufacture, which is based on use of mill scale and natural mineral – saponite as the main components. Compression technology provides products at low pressures and sintering by passing high-temperature synthesis. The proposed technology is characterized by low cost and good physical and mechanical properties of the product that gives a reason to use them for filtering and regeneration of technical liquids.
Authors and Affiliations
Y. Povstyana, I. Saviuk, L. Samchuk, N. Zubovetska
Keywords
Related Articles
- EP ID EP241733
- DOI -
- Views 78
- Downloads 0
Numerical Simulation of the Evaporative Air Cooler with a Capillary-Porous Structure
Application of evaporative air cooling in various technologies allows reducing energy costs for improving environmental performance. Considering the promise of using air coolers with a capillary-porous structure, a mathe...
Alternative technology to manufacture bimetallic products by using self-propagating high temperature synthesis
Electric welding is usually used for surfacing metal products. This process may be laborious and timeconsuming, which at the same time excludes welding jointing throughout the product surface. The productivity of powder...
Mathematical simulation of fluid flow and analysis of flow pattern in the flow path of low-head Kaplan turbine
The results of numerical investigation of spatial flow of viscous incompressible fluid in flow part of Kaplan turbine PL20 Kremenchug HPP at optimum setting angle of runner blade φb = 15° and at maximum setting angle φb...
Diamond Grinding the Ceramic Balls from Silicon Carbide
The influence of the machining regime was experimentally investigated on the output indexes of the diamond grinding the ceramic balls from silicon carbide, such as the rate of the material removal and the rate of changin...
Comparison between PID and Artificial Neural Networks to Control of Boiler for Steam Power Plant
This paper presents is to develop and compare neural network and conventional based controllers for a boiler of steam power plant. Designs of two different controllers for pressure and temperature are presented for keepi...