Alumina Powder Properties Obtained by Neutralization Process of Sodium Aluminate
Journal Title: Analele Universitatii "Dunarea de Jos" din Galati. Fascicula IX, Metalurgie si Stiinta Materialelor - Year 2009, Vol 32, Issue 2
Abstract
Today, the most production of alumina is used for aluminum production [1, 2] (metallurgy alumina), minor production of alumina is used for special purpose, as fire-resistant materials, electro porcelain and etc., and because this alumina are called special alumina. For production some types of special alumina, as activated alumina (alumina with good adsorption properties) Bayer process is not optimal. Aluminum-hydroxide (gibbsite) obtained with this procedure have small specific area, approximately ~10 m2 /g, and it was thermal treatment on 400-500°C given γАl2О3 with up specific area around 250 m2 /g. Some physical-chemistry properties (adsorption’s properties) of obtained alumina under these conditions are unsatisfactory for requirement in last time. High specific area, and also good adsorption properties of activated alumina, can be reached by using different procedures of synthesis starting aluminum–hydroxide with adjusting synthesis conditions and later thermal treatment. The aim of this paper is research powder properties of aluminum hydroxide obtained by neutralization process of sodium aluminates.
Authors and Affiliations
Mitar PERUŠIC, Vladan MIĆIĆ, Zoran OBRENOVIĆ, Radislav FILIPOVIĆ
Keywords
Related Articles
- EP ID EP655754
- DOI -
- Views 71
- Downloads 0
Laser Surface Hardening of 51CrV4 Steel
The work presents the surface changes in microstructure and properties by quenching the 51CrV4 steel from liquid and solid phase, using a CO2 continue laser wave with 900W power. In order to determine the hardening condi...
Electrodeposition and Characterization of Zinc-Cobalt Alloy Coatings
Electrodeposited alloys are important in industry due to their properties which are superior to those of single metal layer. Zinc-cobalt alloys were co-deposited on gold substrate. Composition of the layers was establish...
Research on the Corrosion Resistance, in Saline Solution, of Steel Sheets for Industrial Construction, by Gravimetric Method
In this paper, it was presented a study on corrosion in saline medium, by gravimetric method, of the steel sheets for industrial construction. The corrosion rate was estimated by gravimetric method and evaluate based on...
Study on the Influence of the Chemical Composition in the Thermomechanical Processing of the Steel Products
This paper presents the results of industrial scale researches on the influence of the chemical composition on the characteristics of high yield point plates of wieldable fine grain steels. The comparative study of the m...
Elements of Drawing Theory and Technology of the High Mechanical Strength Wires in Ultrasonic Field
In the paper are presented elements of drawing theory and technology of the high mechanical strength wires, when the auger die is located in the maximum of the waves oscillation and it is activated on drawing direction....