AN APPLICATION OF IRIDM IN THE DECISION MAKING PROCESS ON FUEL CONVERSION OF THE MARIA REACTOR
Journal Title: Informatyka Automatyka Pomiary w Gospodarce i Ochronie Środowiska - Year 2013, Vol 3, Issue 3
Abstract
Poland, when acceded to GTRI (Global Threat Reduction Initiative) in 2004, has committed to convert the nuclear fuel of the Research Reactor MARIA, operated by the National Centre for Nuclear Research (NCBJ) in Świerk. The conversion means giving up of high enriched uranium fuel containing 36% of U-235, which was used so far, and replacing it with the low enriched uranium fuel (19.7% U-235). This article describes the potential usability of the Integrated Risk Informed Decision Making (IRIDM) methodology in optimization of the fuel conversion procedure.
Authors and Affiliations
Mieczysław Borysiewicz, Karol Kowal, Piotr A. Prusiński, Marcin Dąbrowski
Keywords
Related Articles
- EP ID EP59458
- DOI -
- Views 127
- Downloads 0
FREQUENCY DEPENDENCE OF THE MAGNETOELECTRIC VOLTAGE COEFFICIENT IN (BiFeO3)x-(BaTiO3)1-x CERAMICS
Composition-dependent magnetoelectric properties of sintered (BiFeO3)x-(BaTiO3)1-x ceramics have been recently observed and reported in the literature. Measurements of the magnetoelectric effect (ME) for these materials...
POLE MAGNETYCZNE SZYNOPRZEWODÓW PROSTOKĄTNYCH O SKOŃCZONEJ DŁUGOŚCI
W artykule przedstawiono nową analityczną metodę obliczania pola magnetycznego układów szyn prostokątnych. Metoda wykorzystuje prawa Biota-Savarta. Zaproponowana metoda pozwala na wyznaczanie rozkładu pola magnetycznego...
AUGMENTED REALITY – THE WAY TO USING ADVANCED TECHNOLOGY IN NORMAL LIFE
The rapid growth of smartphone market share is a key factor for both developing and implementing many solutions dedicated to mobile devices. One of the most promising technologies is Layar - a mobile platform for discove...
USE OF THERMAL IMAGING IN CONSTRUCTION
Thermovision is a research method based on non-invasive and non-contact evaluation of temperature distribution on the surface of the examined body. These methods are based on observation and recording of the distribution...
STABILIZATION CONTROL FOR THE INTERIA WHEEL PENDULUM BASED ON LQR CONTROLLER
Work is about stabilizing the inverted pendulum object called IWP (Inertia Wheel Pendulum). It is a non-linear mechanical system in the form of an inverted pendulum containing a flywheel mounted on top accelerated by DC...