An Approach Using Sudden Change in Geometrical Shape of a Sample for Fabricating Micro Materials Utilizing Electromigration

Abstract

The utilization of electromigration of induced micro materials in passivated aluminum films was investigated. The experimental sample was a passivated polycrystalline Al line with a hole using sudden change in geometrical shape of the specimen. However, the sudden change in the geometrical shape of the metal line is considered for effective accumulation of atoms. Therefore, the microsphere inside the hole, microsphere outside the hole and large cracks were formed at the predetermined positions of the sample using sudden change in geometrical shape. The experimental results and model are explained in the discussion.

Authors and Affiliations

Faizul Mohammad Kamal, Md. Nazrul Islam Khan

Keywords

Related Articles

Design of A Low Power Dissipation Bandgap Voltage Reference Without Resistors

With the development of portable electronics, low power dissipation have become the main direction of current chip research, because Bandgap Reference (BGR) circuits are widely used in modern LSIs to generate a reference...

Comparative Analysis of Integrating WECS with PMSG and DFIG Models connected to Power Grid Pertaining to Different Faults

In the present centaury wind propelled power generator has become the most challenging with the power system in terms of power quality and harmonic distortion control. These challenges are now overtaken by the advancemen...

Review of HVDC Circuit Breakers Topologies.

Voltage Source Converter-High Voltage Direct Current (VSC-HVDC) is the most efficient and reliable method for electrical power transmission over long distances. The greatest challenge with VSC-HVDC system is that short-c...

Low-Cost Test of An RF Mixer For Wi-Fi Applications

This Paper Proposes A Variety Of On-Chip Monitors In Order To Implement A Low-Cost Test Methodology For Circuits And Radio-Frequency (Rf) Systems After The High Volume Production Stage. It Is Not The First Time That We P...

Recent Trends and Improvisations in FPGA

With the improvements of VLSI design in FPGA, the application areas got wider. The FPGAs architectural developments afford FPGA developers to produce effective devices day-by-day. Today these applications wider from comm...

Download PDF file
  • EP ID EP388525
  • DOI 10.9790/1676-1301012329
  • Views 126
  • Downloads 0

How To Cite

Faizul Mohammad Kamal, Md. Nazrul Islam Khan (2018). An Approach Using Sudden Change in Geometrical Shape of a Sample for Fabricating Micro Materials Utilizing Electromigration. IOSR Journals (IOSR Journal of Electrical and Electronics Engineering), 13(1), 23-29. https://europub.co.uk/articles/-A-388525