AN EFFECT OF LIQUIDS WITH VARIOUS PHYSICO-CHEMICAL PROPERTIES ON THE ABRASIVE WEAR INTENSITY OF HYBRID LAYERS DETERMINED USING THE BALL-CRATERING TEST
Journal Title: Tribologia - Year 2013, Vol 248, Issue 2
Abstract
The authors present test results concerning the resistance to abrasive wear of selected hybrid layers applied for improving durability of forming tools. For tribological testing the ball-cratering test method was used. Two liquids intended for preparation of slurries – deionised water and ethanol were used. The influence of the tested liquid on the abrasive wear intensity of the hybrid layers with the nitriding layer – PVD coating structure was analysed. The explanation of the influence of the liquids used for testing the abrasive wear intensity of the tested hybrid layers has been attempted.
Authors and Affiliations
Jan Bujak, Joanna Kacprzyńska, Jerzy Smolik
Keywords
Related Articles
- EP ID EP270347
- DOI -
- Views 53
- Downloads 0
ANALYSIS OF FRACTURE AND WEAR RESISTANCE OF ZrN COATINGS
The article presents the results of mechanical and tribological studies of ZrN coatings that allowed the determination of their hardness, elasticity modulus, and scratch and wear resistance. Tests were carried out for 1,...
CHARACTERISTICS OF OIL REGENERATION FOR LUBRICATED FRICTIONAL CONNECTIONS
During the lubrication of frictional connections, physical and chemical processes causing changes in the fundamental properties of oil, such as lubricity and viscosity, take place. Such changes are from mutual interactio...
OCENA ODPORNOŚCI NA ZUŻYCIE I KOROZJĘ ZŁĄCZY WYKONANYCH POMIĘDZY TYTANEM A STALĄ NIERDZEWNĄ ZA POŚREDNICTWEM Al, Cu ORAZ Ni
W niniejszej pracy połączono czysty tytan (Grade 2) ze stalą nierdzewną (X5CrNi18-10) poprzez spajanie dyfuzyjne z użyciem międzywarstw z aluminium, miedzi oraz niklu (100 μm). Badanie koncentruje się na porównaniu odpor...
Wpływ obciążenia i prędkości obrotowej na zużycie stali bainitycznej w skojarzeniu ślizgowym na stanowisku Amslera
TRIBOLOGICAL PROPERTIES OF COMPOSITE COATINGS ON ALUMINIUM ALLOY PARTS FOR TRANSPORT MEANS
The present paper describes the structure, surface topography, and tribological properties of a DLC composite coating produced by magnetron sputtering on an engine cylinder liner AC-AlSi12NiCuMg (AC-47000) cast alloy as...