An Experimental Analysis of Direct Evaporative Cooler by Varying Materials of Cooling Pad
Journal Title: International Journal of Mechanical and Production Engineering Research and Development (IJMPERD ) - Year 2017, Vol 7, Issue 6
Abstract
This research aims to examine the performance of the direct evaporative cooler, by using the cooling pads of different materials. The efficiency of direct evaporative cooler mostly depends on the cooling pad and hence, the material used in the cooling pad plays a very vital role. Here, the performance of direct evaporative cooler is analyzed by using cooling pads of four different materials such as cellulose paper pad, wood fibers, wood wool (Aspen) and coconut fibres. Apart from these four types of cooling pads, also the performance of direct evaporative cooler is analyzed by using three different types of cooling pads simultaneously on three sides of the cooler, which mainly includes cellulose paper pad, coconut fibre pad and wood wool (Aspen) pad. Two most important terms considered in this analysis are temperatute and humidity. The readings of these two terms are taken for each type of cooling pad and also, the further calculations are done based on these readings. Comparison of results for various types of cooling pad is also done. The paper rounds off with conclusions and an agenda for future research in this area.
Authors and Affiliations
Kapish T Dhakulkar, M. R. Dharme, K. R. Gawande
Keywords
Related Articles
- EP ID EP257094
- DOI -
- Views 104
- Downloads 0
A Review on Minimum Quantity Lubrication (MQL) for Sustainable Machining Processes and its Application
The use of cutting fluid by industrial manufacturers has benefited the machining processes, effectively. Cutting fluids reduce the temperature of the surface, frictional effects; it also removes chips by flushing them an...
On the Thermoplasticity Constitutive Relations for Isoptopic and Transversely Isotropic Materials
The widely used engineering construction materials such as fiber and laminated composite materials are usually under the thermomechanical forces and undergoes thermoplastic deformations. These composites may be considere...
A Power Efficient Multiplier Architecture for FIR Filters used for Acoustic Models in Mechanical Diagnostics
Finite Impulse Response (FIR) channels are broadly utilized as a part of multi standard remote interchanges. The important pre requisites of channels are re configurability and low many-sided quality. This paper proposes...
THE COMPARISON OF DEVIATIONS OF FREEFORM SURFACES USING RE-ENGINEERING BY NON-CONTACT SCANNERS
There are various types of optical and Laser 3D scanners used for capturing the point cloud data in reverse engineering approach. The present article deals with the comparison of EINSCAN Scanner and the V5 PERCEPTRON 3D...
COMPARATIVE ANALYSIS FOR COEFFICIENT OF FRICTION OF LM 25 ALLOY AND LM 25 GRANITE COMPOSITE AT DIFFERENT SLIDING SPEEDS AND APPLIED PRESSURE
In today’s competitive world material researchers are based on cost-efficient, lightweight, performance efficient and environment-friendly replacements of traditional metals and their alloys. Most of the engineering appl...