Crack Depth and Crack Location Identification using Artificial Neural Network
Journal Title: International Journal of Mechanical and Production Engineering Research and Development (IJMPERD ) - Year 2019, Vol 9, Issue 2
Abstract
Identification of crack depth and crack location is an area of concern for researchers across the globe. In the present paper, artificial neural network used to identify crack depth and crack location. Finite element model of rotary shaft with two bearing support was generated. A single crack of varying depth (2mm, 4mm and 6mm) was provided to finite element model of a shaft. Crack distance from bearing support was altered (100 mm, 200 mm, 300 mm and 400 mm). Natural frequency of rotor shaftwas obtained using the modal analysis method. Critical speed of shaft models was obtained from Campbell diagram. Thus, natural frequency and critical speed for all variations of cracks depth and crack locations were obtained. Critical speed and natural frequency for known crack location and crack depth wereused to train an artificial neural network. The training of artificial neural network was completed, with the help of artificial neural network crack location, and crack depth was identified accurately.
Authors and Affiliations
Abhijeet H Kekan, Raghu kumar. B
Keywords
Related Articles
- EP ID EP585562
- DOI 10.24247/ijmperdapr201970
- Views 71
- Downloads 0
COMPUTATIONAL ANALYSIS OF A CD NOZZLE WITH ‘SED’ FOR A ROCKET AIR EJECTOR IN SPACE APPLICATIONS
The main objective of the work presented in this paper is to optimize the configuration of rocket air ejector. An ejector system is to be designed in order to pump out the gasses from low pressure to ambient conditions....
FRICTION STIR PROCESSED AA6061 WITH B4C – GRAPHITE HYBRID SURFACE COMPOSITE AND ITS MECHANICAL BEHAVIOUR
In this study, A6061-B4C-Graphite hybrid surface composites were fabricated with different volume percentages using micron sized particles via friction stir processing technique in order to increase the surface mechanica...
Experimental Investigation of Heat Transfer Characteristics in Al2O3 – Water Based Nanofluids Operated Shell and Tube Heat Exchanger with Air Bubble Injection
Shell and Tube heat exchanger is one of the heat exchangers that are widely being used in industries and in other important commercial purposes. The different techniques have been employed to enhance the thermal or heat...
CFD Analysis on Buble Growth and Bubble Departure in Pool Boiling
The process of bubble nucleation, growth and detachment are simulated using volume fraction method. As the bubble grows to a certain size, it will eventually detach from an active nucleation site, especially for the case...
Experimental Investigation of Stitched and Unstitched Bamboo Fiber Using Sugarcane Powder
To examine the performance analysis of stitching and unstitching of a bamboo fiber laminates and to investigate the de-lamination resistance of laminates. Unstitched, and stitched specimens were prepared with orientation...