Research on Electrophysical Characteristics of Plasma Arc in CO2
Journal Title: International Journal of Mechanical and Production Engineering Research and Development (IJMPERD ) - Year 2019, Vol 9, Issue 5
Abstract
A brief analytical review of research papers on the processes of arc welding was made. Conclusion on the relevance of the research in the field of synthesis of welding process control systems and the use of automatic systems was made. To implement the control processes, empirical studies of the current-voltage characteristics of the arc were performed to determine the parameters that could be considered as the parameters of the automatic control system. The experiments were performed to study the current-voltage characteristics of a compressed plasma-arc when C02 is used as plasma gas. Different torch schemes were used in the experiments. Forms of the current-voltage characteristics were examined. A conclusion was made that the parameters to control the welding process should be carried out with respect to a set of parameters, i.e. it should be vectorial. Accurate analytical models of welding processes are impossible to obtain, therefore, the methods of the fuzzy set theory are used, the decision models and the theory of possibilities that should be applied to formalize the welding parameters and the construction of the control system should be performed in the form of a hybrid control system.
Authors and Affiliations
Al-Shamkhee Ameer Abdulkadhim Oudah, Shepelev Anatoliy Fedorovich, Finaev Valeriy Ivanovich, Zargaryan Elena Valerevna
Keywords
Related Articles
- EP ID EP671636
- DOI 10.24247/ijmperdoct20199
- Views 179
- Downloads 0
Design of Centrifugal Pump Impeller and its Effects on Cavitation
A centrifugal pump’s function is to transport fluid from one system to another system, within minimum time. Impeller is a key component in centrifugal pump, it intakes fluid through hub of impeller axially and distribute...
The Performance Evaluation of Injector using Numerical Technique
In this study, the aeronautical and aerospace standard rocket injector have been analyzed with different aerodynamic parameters in order to understand the performance of the injectors in different atmospheric conditions....
STUDIES ON EFFECT OF WELDING PARAMETERS ON THE FRICTION STIR WELDING OF ALUMINIUM 6061-T6 BUTT WELDED JOINTS USING TAGUCHI L9 APPROACH
The two sheets of aluminum 6061-T6 alloy of size 200×150×3 (mm) are butt-welded by the friction stir welding process by varying the weld parameters such as rotational speed, tilt angle, and feed. The taguchi L9 experimen...
Effect of T6 Heat Treatment on Hardness Wear and Fatigue Behaviour of Nickel Coated Carbon Fiber Reinforced Al-7079 MMC
Aluminum metal matrix composites are preferred over other conventional materials in the field of aerospace, marine and automotive applications due to their improved tribological and mechanical properties and increased st...
Design and Testing of Rocket Motors with Composite Propellants
In space missions, satellite launchings and missiles for army applications, solid rocket motors plays a major role. As we know that the thrust produced by the rocket engines only gives the forward motion to the rocket bo...