An Innovative Design solution for minimizing Power Dissipation in SRAM Cell
Journal Title: International Journal of engineering Research and Applications - Year 2017, Vol 7, Issue 5
Abstract
Over the years, the development of the logic on the chip is increased. To sustain and drive the logic flow, various techniques and SRAM cell designs have been implemented. The basic element of memory design is 6T SRAM cell. But while dealing with this 6T SRAM cell there are some issues with the parametric analysis on the performance of the cell. This paper presents an innovative design idea of new 8T RAM cell with various parametric analysis. The proposed cell is compared with the standard cell in terms of different parameters such as area, speed and power consumption along with the loading effect with the increase in load capacitance on the cell. The structure is designed with CMOS 45 nm Technology with BSIM 4 MOS modelling using Microwind 3.5 software tool.
Authors and Affiliations
Miss. Varsha Phad, Prof Swati Shetkar
Keywords
Related Articles
- EP ID EP391102
- DOI 10.9790/9622-0705012528.
- Views 118
- Downloads 0
Raspberry Pi Controlled Electronic Signboard
In this study, an embedded system has been developed to provide remote control of dot matrix signboards widely used nowadays. With this developed system, it is possible to control and use one or more signboards anywhere....
Modeling and control of PMSG based variable speed wind turbine using Proportional Resonant controller
This paper presents a controlling scheme of a permanent magnet synchronous generator based variable speed wind turbine connected to the utility grid, and a full-scale back-to-back voltage source converter to regulate the...
Determining Mix Proportion For The Marble Slurry Powder Recovered From Marble Slurry Replacing Fine Aggregate Of Concrete Used In Residential Construction Project In Udaipur, India
The use of recycle materials as concrete ingredients has gained popularity because of increasingly stringent environmental legislation. it is find out that marble powder recover from Marble slurry can be replaced fine ag...
Removal Of Inorganic Contaminants from Surface And Groundwater By Using NF/RO Filtration System
A comprehensive study was conducted to examine the removal of inorganic contaminantswhich exist in surface and groundwater in the Illawarra and Sydney regions. The ability of nanofiltration (NF) and reverse osmosis (RO)...
Various Options for Removal of Fluoride from Drinking Water
Excessive fluoride concentrations have been reported in groundwaters of more than 20 developed and developing countries including India where 19 states are facing acute fluorosis problems. Various technologies are being...