AN INVESTIGATION OF THE EFFECT OF TOUGHNESS AND BRITTLENESS INDEXES ON AMPERE CONSUMPTION AND WEAR RATE OF A CIRCULAR DIAMOND SAW
Journal Title: UNKNOWN - Year 2018, Vol 33, Issue 4
Abstract
The circular diamond saw (CDS) is one of the major sawing machines in dimension stone processing plants. Predicting the performance of a circular diamond saw is very important to estimate the cost and the planning of the stone processing plants. The performance of a CDS depends on some important factors such as machine and tool characteristics, physical and mechanical characteristics of rock and tool wear rate. In this research, it is aimed to investigate the relationship between ampere consumption, brittleness indexes and toughness with the wear rate of a CDS. This aim was pursued by using a fully instrumented cutting rig to cut 14 types of hard rock at constant feed rates, cut depths and peripheral speeds. Wear rate, toughness and brittleness indexes were evaluated using simple and multiple curvilinear regression analysis and predicted models were developed. The results indicated that there is a significant correlation between wear rate, ampere consumption and toughness. It is concluded that, the wear rate of a CDS can be reliably estimated using a multiple curvilinear model which includes ampere consumption and toughness.
Authors and Affiliations
Masoud Akhyani, Farhang Sereshki, Reza Mikaeil
BRODOVI ZA UKAPLJENI PRIRODNI PLIN
Moderni brodovi za prijevoz ukapljenog prirodnog plina su brodovi s dvostrukim dnom čija se klasifikacija vrši prema tipu spremnika. Spremnici su posebno projektirani budući da se u njima skladišti prirodni plin ohlađen...
PROBNA PODZEMNA EKSPLOATACIJA ARHITEKTONSKO-GRAĐEVNOG KAMENA U KAMENOLOMU "KANFANAR", ISTRA
Preliminarno izvješće o rezultatima praćenja probne podzemne eksploatacije arhitektonsko-građevnog kamena u slojevitom ležištu. Podzemna je eksploatacija detaljno opisana i sugerirane su metode za njeno izvođenje.
MIDDLE MIOCENE DROWNED RAMP IN THE VICINITY OF MARIJA BISTRICA (NORTHERN CROATIA)
Fossiliferous Middle Miocene deposits from the surroundings of Marija Bistrica (north-east of Zagreb) transgressively overly older pre-Cenozoic bedrocks. Fossils from shallow marine environments are in most cases preserv...
THE STUDY OF GAS MIGRATION IN CRYSTALLINE ROCK USING INJECTION TESTS
The study of gas migration in crystalline rock using injection tests is being carried out in the frame of the FORGE (Fate of Repository Gases) project. The Czech Technical University in Prague (CTU), Centre of Experiment...
DRILLING FLUIDS DIFFERENTIAL STICKING TENDENCY DETERMINATION
Differential sticking is def ned as stuck pipe caused by the differential pressure forces from an overbalanced mud column acting on the drillstring against f lter cake deposited on a permeable formation. It is infl uen...