An Investigation of The Effects of Mn Amount on Wear Behaviors of 7075Al Alloy Produced by Powder Metallurgy Method
Journal Title: Gazi Üniversitesi Fen Bilimleri Dergisi Part C: Tasarım ve Teknoloji - Year 2018, Vol 6, Issue 2
Abstract
In this study, microstructure, hardness and wear behaviors of 7075 Al alloy with adding different amount of Mn were investigated produced by powder metallurgy method. In the scope of the study, four different amount of Mn (0.5%, 1%, 2%,3%) was added to gas atomized 7075 Al powders and mechanical mixed. Mixed Al and Mn powders were pre-shaped by cold pressing. Then, they were sintered in an atmosphere controlled furnace. Microstructure examination was done by scanning electron microscope, hardness values were measured using macro hardness tester. The wear tests were performed by pin-on disc type wear test device under 15 N loads with four different sliding distances. As a result of the study, it was determined that the hardness values were increased by increasing amount of the Mn. In addition, wear loss were decreased with increasing Mn amount.
Authors and Affiliations
Musa YILDIRIM, Dursun ÖZYÜREK
Keywords
Related Articles
- EP ID EP489812
- DOI 10.29109/http-gujsc-gazi-edu-tr.336025
- Views 103
- Downloads 0
Synthesis and Characterization Studies of New Generation MIL-101 Materials
MIL-101, a kind of Metal Organic Frameworks (MOFs), has attracted attention in recent years with its promising applications in the chemical industries. MIL-101 is also known as “Porous Chromium Terephthalate”. It has ver...
Investigation of Steel Fiber Usability in Concrete Traverse Produced by Limestone Aggregate
In this study, with the limestone aggregate concrete sleeper steel fiber produced was researched. Working with limestone aggregates, the maximum aggregate particle size and the amount of steel fiber volume to be replaced...
Multiobjective Knapsack Problem with Equity Concerns
In this paper, a multi-objective mathematical modeling approach has been developed for resource distribution problem which has equity concerns. We assume that the preference model of the decision maker satisfies properti...
Prediction of Dielectric Properties of Polypropylene/Polyaniline Composite Films By Artificial Neural Networks Model
In this study, the change of the frequency dependence of the real and imaginary components of the complex dielectric function of the polypropylene (PP) polymer depending on the addition of 0.3%, 0.4%, 0.6% and 0.7% polya...
The Effect of Organic Polymer Interfacial Layer Thickness and Series Resistance C-G/-V Characteristics in Al/PVA (Zn-doped)/p-Si (MPS) Structure
In this study, the electrical properties of polymer interfacial layer Al/p-Si (MPS) with thickness of 50 and 150 nm (Zn-doped PVA) were investigated in terms of frequency using the capacitance- conductance-voltage (C-G/...