AN OFFLINE PATH PLANNING METHOD FOR AUTONOMOUS VEHICLES
Journal Title: Production Engineering Archives - Year 2018, Vol 19, Issue
Abstract
Driving a road vehicle is a very complex task in terms of controlling it, substituting a human driver with a computer is a real challenge also from the technical side. An important step in vehicle controlling is when the vehicle plans its own trajectory. The input of the trajectory planning are the purpose of the passengers and the environment of the vehicle. The trajectory planning process has several parts, for instance, the geometry of the path-curve or the speed during the way. Furthermore, a traffic situation can also determine many other parameters in the planning process. This paper presents a basic approach for trajectory design. To reach the aim a map will be given as a binary 2204 x 1294 size matrix where the roads will be defined by ones, the obstacles will be defined by zeros. The aim is to make an algorithm which can find the shortest and a suitable way for vehicles between the start and the target point. The vehicle speed will be slow enough to ignore the dynamical properties of the vehicle. The research is one of the first steps to realize automated parking features in a self-drive car.
Authors and Affiliations
Árpád Barsi, Ádám Nyerges, Vivien Potó, Viktor Tihanyi
Keywords
Related Articles
- EP ID EP489022
- DOI 10.30657/pea.2018.19.08
- Views 98
- Downloads 0
FATIGUE LIFETIME OF 20MnV6 STEEL WITH HOLES MANUFACTURED BY VARIOUS METHODS
In this paper, the authors publish their own experimental results of the examination of the different holes (milled, drilled and drilled + shot peened) on the fatigue lifetime of 20MnV6 steel. The experi-ments were carri...
Process of quality improvement in the company producing building materials
The aim of the study was to identify the problems and improve the pro-duction of cement in a ball mill in terms of technology and management associated with the use of known methods and techniques to improve quality. A d...
Quality analysis of plates for car industry
In 2013, global steel production reached a level of 1.548 million tons. This value indicates that, in the 21st century, steel is still one of the most popular construction materials. In Poland 8.2 million tons of steel w...
Development of polyurethane paint metallic effect without cloud defect
The article presents tests results of the metallic paint system. The system consists of high solid corrosion protection primer and dual-component topcoat with a metallic gloss effect (RAL 9006). The paint system properti...
Automatization in road transport: a review
In this article automatization of road transport is investigated. In the first chapter relevant international trends were identified. In this paper the research hypothesis is that in the case of automatized road vehicle...