An Optimisation of Spray and Performance Emission Characteristic of Biodiesel and its Blends by Varying Injection Timing in Diesel Engine
Journal Title: International Journal of Mechanical and Production Engineering Research and Development (IJMPERD ) - Year 2019, Vol 9, Issue 3
Abstract
The main objective is to optimize the various parameters of spray for different blends of biodiesel and Injection pressure mainly with respect to Spray tip penetration Spray cone angle and Sauter Mean Diameter (SMD), using the conception of Taguchi with too categorize its involvement by Analysis of Variance normally recognized like ANOVA with the help of “Minitab 14.0” software where the optimum levels of the parameters were found using higher Signal - Noise ratio. By variying the injection timing (Normal, restarted and advanced) in the Direct injection diesel engine the performance, emission and combustion characteristics was studied. It was found KB20 at 220 bar and 19o BTDC gave better performance and lower pollutant emission.
Authors and Affiliations
P. Raghu, B. Sakthivel, V. V. Linkesh Kumar, J. Pradeep Raj, S. Niranjan Suresh
Keywords
Related Articles
- EP ID EP612210
- DOI 10.24247/ijmperdjun201917
- Views 85
- Downloads 0
Performance Evaluation of VCR CI Engine Using C-D Intake Manifold With Internal Grooving
Compression ratio (CR) is a design parameter that influences efficiency, characteristics as well as emissions from the engine. Varying of Compression Ratio is done to increase fuel efficiency under varying loads. The exp...
The Effects of TiC Reinforcement on Thermal, Electrical and Dry Sliding Wear Behaviour of Aluminium Matrix Nanocomposites
The present work is to investigate the thermal, electrical & dry sliding wear behaviour of aaluminium matrix composite reinforced with dissimilar particle size (≤ 200 nm and 2 μm) of titanium carbide particles. An alumin...
A Survey on Computer Automated Trading in Indian Stock Markets
In India day by day increasing investors attitude to invest amount in stock markets due to increasingly use of automated systems, social network analysis, predictive analysis, data mining tools and machine learning. In t...
Effect of Dimethoxy-Methane (C3H8O2) Additive on Emission Characteristics of a Diesel Engine Fueled with Biodiesel
This paper investigates the utilization of Palm Oil Methyl Ester (PAM) blends with diesel in a compression ignition engine. The performance and combustion characteristics of 20% Palm Oil Methyl Ester and 80% Diesel and a...
Finite Element Analysis and Multibody Dynamics of 6-DOF Industrial Robot
This paper implements the design structure of industrial robot along with the different transmission components like gear assembly and analysis of complete industrial robot. In this paper, it gives the overview of the mo...