An Ordnance Reliability and Life Model for the Estimation of the Component Kits in Preventive Replacement in Terms of Production and Operating Costs
Journal Title: Problemy Mechatroniki. Uzbrojenie, lotnictwo, inżynieria bezpieczeństwa - Year 2019, Vol 10, Issue 2
Abstract
This paper presents an outline of a method of optimising the service life of aircraft guns at the stage of design engineering and retrofitting. The essence of this method is a selection of service lives and quantities of preventively replaced components and the service parts of non-reconditionable components resulting in an overall reduction of gun production and operating costs (including the costs of replacement parts stocks) with an improvement of the service life of the whole gun assembly. The method assumes that the service lives to be selected must meet a criterion of predefined reliability, maximum service availability when installed aboard a combat platform (i.e. an aircraft) and the minimum time to re-use. It is pointed out that in the design engineering of preventive component replacement and the assessment of the gun selection, a criterion of total gun cost reduction shall apply; the total gun cost is construed as the cost of production/purchase and maintenance applicable to the operating mode (with the costs and time to provide replacement parts). The total gun cost should be decisive in the definition of service lives and the number of components in preventive replacement. To analyse and select the service life and the MTBR (Mean Time Between Replacements), examples of reliability and life models of guns were developed in reference to the applicable operating standards and changes in total costs. This was followed by a demonstration of an innovative model of mapping gun (production/purchase and operating) costs with a complex number plane. The method presented herein facilitates analysing and assessing the feasibility for improvement of a gun’s availability in combat field and training operations.<br/><br/>
Authors and Affiliations
Zdzisław IDZIASZEK
Keywords
Related Articles
- EP ID EP599520
- DOI 10.5604/01.3001.0013.2119
- Views 80
- Downloads 0
A Concept for Striking Range Improvement of the GROM/PIORUN Man-Portable Air-Defence System
This paper presents a concept for striking distance performance improvement of the GROM/PIORUN Man-Portable Air-Defence System rocket missiles by increasing the rated diameter of the rocket missile propulsion system and...
A Concept of Live Fire Testing to Identify the Aerodynamic Coefficients of a 35 mm Anti-Aircraft Projectile
This paper presents a generic algorithm designed to identify aerodynamic coefficients among the data specified in firing tables and projectile flight parameter data recorded during live fire tests. The algorithm and the...
Some Relationships Among Thermal Properties, Detonation Parameters and Sensitivity of Nitramine Fillers in Formex Based PBXs
Thermal behavior and decomposition kinetics of formex-bonded PBXs based on some attractive cyclic nitramines (BCHMX, HMX, RDX and CL-20) were investigated by means of nonisothermal Thermogravimetry (TG) and Differential...
Ballistic Tests of Susceptibility to Fragmentation of Tungsten Heavy Alloys Made From Differently Prepared Mixtures
The paper describes the results of ballistic tests of tungsten heavy alloys (WSC) susceptible to fragmentation. The materials being studied were the samples in the form of cal. 7.62 x 54 mm „Mosin” of heavy alloys proje...
Koncepcja zapalnika uderzeniowego do amunicji odłamkowo-burzącej wystrzeliwanej ze 120 mm samobieżnego moździerza RAK
Artykuł zawiera koncepcję nowego zapalnika uderzeniowego do pocisków odłamkowo-burzących wystrzeliwanych ze 120 mm samobieżnego moździerza RAK. Przedstawiono budowę i zasadę działania podstawowych zespołów zapalnika.