Analisa Pengendali Hybrid Sliding Mode Control dan Fuzzy Logic Controller dalam Penurunan Error Steady State Untuk Mengendalikan Concentration pada Isothermal Continuous Stirred Tank Reactor (CSTR)
Journal Title: Jurnal Ecotipe (Electronic, Control, Telecommunication, Information, and Power Engineering) - Year 2019, Vol 6, Issue 1
Abstract
Systems in industry often occur in performance or desired performance. One of them isothermal CSTR system where the system has not been able to work according to the desired set point 1 g.mol / litter, to achieve the set point then used the controller Sliding Mode Control in Hybrid with Fuzzy Logic Controller in identification with FOPDT method to lower the value steady state error. hybrid sliding mode control and fuzzy logic controller has reached the desired set point value of 1 g.mol / litter with settling time 0.7098 sec while sliding mode controller has steady state error 0.0004 g.mol / litter with time steady / settling time 0.7275 seconds.
Authors and Affiliations
Ahmad Faizal, Dian Mursyitah, Ewi Ismaredah
Keywords
Related Articles
- EP ID EP549359
- DOI 10.33019/ecotipe.v6i1.945
- Views 54
- Downloads 0
Pengaruh Ketidakseimbangan Beban Terhadap Stabilitas Steady State
The stability of the electric power system is related to the balance of power in the system. When a power change occurs, the rotor will swing affecting the power angle, rotation speed, frequency and stability of the syst...
Analisa Pengaruh Interferensi Terhadap Availability pada Jaringan Transmisi Microwave Menggunakan Software PATHLOSS 5.0 Studi Kasus di PT. Alita Praya Mitra
In doing microwave transmission interference and attenuation effects , not so much propagation Line Of Sight. Therefore it takes a computation and checking of a transmission network that values of interference does not g...
Desain Pengendali PID – Gain Schedulling Untuk Pengendalian Posisi pada Sistem Magnetic Levitation Ball
This study propose a design of PID controller with gain schedulling optimization to controlling position for Magnetic Levitation Ball (Maglev) system. Design of PID controller with gain schedulling optimization are used...
Penerapan Metode Runge-Kutta Orde 4 dalam Analisis Rangkaian RLC
The existence of inductor and capacitor in RLC circuit without source, at least, creates system that has characteristic of second order differential equation. Differential equation can be solved using 4th order RungeKutt...
Analisis Transfer Daya pada Saluran Transmisi 150 kV dari Gardu Induk Air Anyir ke Gardu Induk Sungailiat PLN Area Bangka
The availability of sufficient and quality electrical energy is a demand that must be fulfilled by PT. PLN (Persero). Distribution of electricity through the 150 kV transmission line with a relatively long distance and u...