Analisis emisi gas buang dan daya sepeda motor pada volume silinder diperkecil
Journal Title: Dinamika Teknik Mesin - Year 2018, Vol 8, Issue 1
Abstract
This research aims to determine the effect of variations diameter pistons on exhaust emissions and fuel consumption. This research used a gasoline engine single-cylinder four-stroke with variations in cylinder volume 100 cc, 90 cc, 60 cc and engine rotation 1500 rpm, 2500 rpm, 3500 rpm, 4500 rpm, 6000 rpm. Data was collected in transmission N, 1, 2, 3, and 4 each of the three repetitions for each round engine rotation, using a gas analyzer 2400 ultra 4/5 IM Hanatech brand for exhaust emission of CO and HC. Based on data analysis, it can be concluded that with decreasing diameter of piston up to 60 cc can reduce exhaust emissions, especially CO, HC and fuel consumption. The highest HC exhaust emissions was in 100 cc cylinder volume that is equal to 514.33 ppm while the lowest HC emissions obtained in 60 cc cylinder volume at 49.67 ppm. The highest CO emission was obtained on 100 cc cylinder by 4.64% volume, while the lowest CO emission was obtained on 60 cc cylinder by 0.31% volume. The highest CO2 emissions obtained in 60 cc cylinder amounted to 17.60% volume, while the lowest CO2 emission obtained at 100 cc cylinder amounted to 8.37% volume, and the highest fuel consumption obtained in 100 cc cylinder at 0.65 kg/h, and the lowest fuel consumption obtained in 60 cc cylinder by 0.06 kg/h.
Authors and Affiliations
IM Mara, IMA Sayoga, IGNK Yudhyadi
Keywords
Related Articles
- EP ID EP250034
- DOI -
- Views 52
- Downloads 0
Variasi sudut pemasangan tabung kompresor terhadap unjuk kerja pompa hidram
Water is one of the factors which very important and necessary in the life of living creatures. Therefore, water must be available whenever and wherever in the quantity, timing, and sufficient quality. Hydrau...
ANALISA PEMURNIAN MINYAK PELUMAS BEKAS DENGAN METODE ACID AND CLAY
Dalam penelitian ini dilakukan pengujian karakteristik viskositas kinematik, specific gravity, warna, kadar air dan volume hasil dari minyak pelumas hasil daur ulang untuk mengetahui variasi campuran optimal antara asam...
Kekuatan mekanik komposit diperkuat serat alam selulosa
This study aims to analyze the tensile and impact strengths of three different types of composites. Composites are made from polyester resins with different fibers; Pandannus Amariliofius fiber (PPW), Eichhornia Crassipe...
Pengaruh variasi komposisi arang kelapa dan kayu berpenguat serat ijuk terhadap sifat fisik dan mekanik komposit kampas rem
The breaking system is a mechanical system to reduce the movement of the wheels. The existing nowadays friction material from asbestos belongs to cancer risk besides accelerating the damage of the brake drum. Therefore,...
Heat loss from hot water flowing in a copper pipe insulated using air enclosed with a PVC pipe
This paper presents investigations of heat loss from hot water flowing in an insulated copper pipe. Investigations were performed to know the heat loss from a copper pipe insulated using air enclosed with a PVC pipe. The...