ANALISIS KETAHANAN ABRASI MATERIAL OUTSOLE POLYURETHANE (PU) & NITRILE BUTADINE RUBBER (NBR) PADA SAFETY SHOES CHEETAH DI PT. X
Journal Title: SINTEK JURNAL: Jurnal Ilmiah Teknik Mesin - Year 2019, Vol 13, Issue 1
Abstract
Improved quality, strength and life time in terms of abrasion resistance on safety shoes outsole Cheetah material where the process use of some material has decreased in quality, besides due to usage factors, maintenance factors, and some of these materials also experience problems during use. This study is done to determine the abrasion resistance of each Outsole Polyurethane (PU) material and Nitrile Butadiene Rubber (NBR). Abrasion resistance test on the material method used the DIN Abrasion tester. Retrieval of data on outsole material was carried out on the outsole material with new conditions and that has been used in the field for a period of 1 year with a method of measuring abrasion resistance index and density of material. Calculation of average abrasion resistance for new Polyurethane (PU) type was 37 , 11 mm3 / year, while the average abrasion resistance for Polyurethane (PU) type that has been used for 1 year was 33.19 mm3 / year so that the difference is 3.92 mm3 / year or about 11% quality decrease of abrasion resistance. The average abrasion resistance with the new Nitrile Butadiene Rubber (NBR) type was 108.26 mm3 / year, the average abrasion resistance for Nitrile Butadiene Rubber (NBR) type with conditions already used in 1 year period was 107.44 mm3 / year so that the difference is 0.82 mm3 / year or about 1% decrease in quality decrease of abrasion resistance. Abrasion tolerance limits that have been set according to the SOP (Standard Operational Procedure) against abrasion resistance if SG ≥ 0.9 then the Abrasive Max is 150 and if SG ≤ 0.9 Then the Abrasive Max is 250.
Authors and Affiliations
Suherna Suherna
Keywords
Related Articles
- EP ID EP668640
- DOI -
- Views 275
- Downloads 0
PENINGKATAN PRODUKTIVITAS PERAWATAN SUMUR MELALUI FAKTOR-FAKTOR DOMINAN
In the upstream oil and gas industry, at plateau production period, well intervention activity is important to maintain the production level. In PT. Total E&P Indonesie, well intervention has contributed approximately 27...
RANCANG BANGUN ALAT PENGADUK ADONAN BUBUR ORGANIK KAPASITAS 7 LITER UNTUK INDUSTRI UMKM
In today's era that is sophisticated and requires speed in the industrial world, humans are required to make and design various tools to get maximum results compared to the manual work of human strength. As an example th...
ANALISIS PERANCANGAN ALAT KHUSUS UNTUK PEMASANGAN SUSPENSI BELAKANG PADA UNIT HD785-7
General Overhaul (GOH) is so much on the HD785-7 unit that it requires speed, accuracy, and discipline during the process so that the target can be met. Slow speed is influenced by several factors, one of which is the pr...
KAJI EKSPERIMENTAL PENGARUH BAFFLE PADA ALAT PENUKAR PANAS ALIRAN SEARAH DALAM UPAYA OPTIMASI SISTEM PENGERING
Heat exchangers or heat exchangers are tools used to change the temperature of the fluid or change the fluid phase by exchanging heat with another fluid. In a heat exchanger, the ability to exchange heat is largely deter...
TEKNOLOGI PROSES PENGECATAN MENGGUNAKAN SISTEM ATOMISASI PADA PRODUK BERBAHAN PLASTIK DI INDUSTRI PERAKITAN SEPEDA MOTOR
Motorcycles are a type of transportation that is familiar in Indonesia. Cost product and speed for mobilization are the main reasons for choosing this transportation. Demand for motorcycles that are still large in Indone...