SINTESIS FASA ɣ-Co PADA PADUAN Co26Cr6Mo0.18N DENGAN KOMBINASI METODE HOMOGENISASI 1200 oC DAN HOT ROLLING SERTA TRANSFORMASI STRUKTUR KRISTALNYA
Journal Title: SINTEK JURNAL: Jurnal Ilmiah Teknik Mesin - Year 2018, Vol 12, Issue 2
Abstract
Co-Cr-Mo alloy is a material that widely used for bioimplant in the medical field due to its corrosion resistance and mechanical properties. Structurally, recommended Co-Cr-Mo alloys for medical applications are ɣ-Co phase which has an FCC structure. But, Co7Mo6 metastable phase often occurs after its synthesis. The formation of Co7Mo6 phase will decrease the composition of ɣ-Co phase. This study aimed to synthesize ɣ-Co phase without following the appearance of Co7Mo6 phase using a combination of 1200 oC homogenization and hot rolling followed by cooling treatment. The alloy used was Co26Cr6Mo0.18N ingot. Cooling treatments were done using the variation of cold water, water and air. The transformation of the crystal structure from the primitive cubic to the FCC occurs during water and air cooling treatments which means that ɣ-Co phase is successfully formed by those cooling treatments. However, Co7Mo6 phase is still formed on the water cooling treatment while none of Co7Mo6 occurred on the air cooling treatment. Structurally, air cooling treatment produces most stable ɣ-Co phase than the others. However, brittle ɛ-Co phase as a partial dislocation is formed after air cooling treatment due to imperfection of hot rolling treatment.
Authors and Affiliations
Ibrahim Purawiardi
Keywords
Related Articles
- EP ID EP669576
- DOI -
- Views 309
- Downloads 0
TEKNOLOGI PROSES PENGECATAN MENGGUNAKAN SISTEM ATOMISASI PADA PRODUK BERBAHAN PLASTIK DI INDUSTRI PERAKITAN SEPEDA MOTOR
Motorcycles are a type of transportation that is familiar in Indonesia. Cost product and speed for mobilization are the main reasons for choosing this transportation. Demand for motorcycles that are still large in Indone...
PENGARUH BENTUK BUKAAN TERHADAP KEKUATAN DAN GETARAN BALOK
Beam is widely used for building and mechanical structure. The beam characteristics must be able to answer the problem in field. In recent years, beam was made which compromised between stiffness and weight of beam. The...
PENINGKATAN PRODUKTIVITAS PERAWATAN SUMUR MELALUI FAKTOR-FAKTOR DOMINAN
In the upstream oil and gas industry, at plateau production period, well intervention activity is important to maintain the production level. In PT. Total E&P Indonesie, well intervention has contributed approximately 27...
RANCANG BANGUN ALAT PENGATUR KERUCUT LALU-LINTAS SEMI-OTOMATIS
The management (pick and place activities) of traffic cones (KLL) is generally performed in traditional way where the operator of KLL management picks and places KLL by using their body power. Therefore, the speed and ef...
ANALISIS POTENSI REFUSE DERIVED FUEL (RDF) DARI SAMPAH PADA TEMPAT PEMBUANGAN AKHIR (TPA) DI KABUPATEN TEGAL SEBAGAI BAHAN BAKAR INCINERATOR PIROLISIS
The garbage dumping in Tegal Regency has reached 989.8 m3/day and increasing every year. The percentage of waste in Murareja landfill is dominated by plastic waste which is 40.15%. The plastic waste will be processed by...