TEKNOLOGI PROSES PENGECATAN MENGGUNAKAN SISTEM ATOMISASI PADA PRODUK BERBAHAN PLASTIK DI INDUSTRI PERAKITAN SEPEDA MOTOR
Journal Title: SINTEK JURNAL: Jurnal Ilmiah Teknik Mesin - Year 2019, Vol 13, Issue 1
Abstract
Motorcycles are a type of transportation that is familiar in Indonesia. Cost product and speed for mobilization are the main reasons for choosing this transportation. Demand for motorcycles that are still large in Indonesia and encouraged motorcycles manufacturing industries to deliver products according to consumer needs. To be able to meet the varied needs of consumers, motorcycle manufacturers always make improvements in all of their production area. There are two main components in the motorcycle, engine and frame. These two components are produced by several parts of production based on the characteristics of each product. The production section of the motorcycle industry that do paintingactivities on plastic products is painting plastic section. The coating technology used in painting plastic is atomization . This technology is a converting liquid material into mist or granules used to coat the product. This technology has many challenges in terms of material transfer to products. The selection of the right material is the key to the atomization process, besides that human factors are also important because the operator's competence or expertise during the painting process can affect product yield. From these problems the author tries to map some of the problems caused by paintings, including technological materials, production systems, product quality and problems caused by painting processes to the environment. However with the level of complexity of the problems faced by the plastic paintingsection, not many studies have focused on the problems in the paintingprocess of plastic products. Therefore the author tries to give a detailed description of the production process in the painting plastic section. The author divides this article into several sub-chapters including paintingtechnology, technology material, production system and Quality properties. Furthermore, the authors hope that this article can be used as a basis for developing the paintingprocess on plastic products.
Authors and Affiliations
Nur Islahudin
Keywords
Related Articles
- EP ID EP668636
- DOI -
- Views 297
- Downloads 0
PENINGKATAN PRODUKTIVITAS PERAWATAN SUMUR MELALUI FAKTOR-FAKTOR DOMINAN
In the upstream oil and gas industry, at plateau production period, well intervention activity is important to maintain the production level. In PT. Total E&P Indonesie, well intervention has contributed approximately 27...
ANALISIS TERJADINYA SLIP PADA KOPLING DI UNIT SCANIA P 124 CB 8x4 NZ 420
In the operation of the unit whose successor does not use a hydraulic system, the role of the clutch is very important in transmitting power from the engine to the transmission. However, the clutch can only slip so that...
PENDEKATAN KARAKTERISTIK RESPON GETARAN SISTEM 2 DOF SETELAH PENAMBAHAN INDEPENDENT DUAL TRANSLASIONAL DYNAMIC VIBRATION ABSORBER
Dual Translational dynamic vibration absorber (dDVA) is two DVA masses that can move in the translational direction and given into the system to reduce system-translation translational vibrations. The research about usin...
TEKNOLOGI PROSES PENGECATAN MENGGUNAKAN SISTEM ATOMISASI PADA PRODUK BERBAHAN PLASTIK DI INDUSTRI PERAKITAN SEPEDA MOTOR
Motorcycles are a type of transportation that is familiar in Indonesia. Cost product and speed for mobilization are the main reasons for choosing this transportation. Demand for motorcycles that are still large in Indone...
RANCANG BANGUN ALAT PENGATUR KERUCUT LALU-LINTAS SEMI-OTOMATIS
The management (pick and place activities) of traffic cones (KLL) is generally performed in traditional way where the operator of KLL management picks and places KLL by using their body power. Therefore, the speed and ef...