ANALISIS TERJADINYA SLIP PADA KOPLING DI UNIT SCANIA P 124 CB 8x4 NZ 420
Journal Title: SINTEK JURNAL: Jurnal Ilmiah Teknik Mesin - Year 2019, Vol 13, Issue 1
Abstract
In the operation of the unit whose successor does not use a hydraulic system, the role of the clutch is very important in transmitting power from the engine to the transmission. However, the clutch can only slip so that it can no longer function to forward power from the engine to the transmission. This can be caused by several things, including: wear on the clutch material, the presence of oil in the field of clutch surface, and spring damage to the clutch. On Scania P 124 CB 8x4 NZ 420 units this slip on clutch problem also occurs so research needs to be done to find the main cause. The method used in this study is to carry out checks and measurements and then the results are compared with the standard values that have been determined. The result shows that the cause of the slip on the clutch on the Scania P 124 CB 8x4 NZ 420 unit is 1) the presence of oil that wet the coupling surface is caused by a damaged seal shaft; 2) wear on clutch components namely clutch disc and pressure plate. To keep the seal shaft in good condition, regular and regular oil changes must be made and when the replacement of the seal shaft must be in accordance with the part number so that the possibility of the same problem can be reduced.
Authors and Affiliations
Rasma Rasma
Keywords
Related Articles
- EP ID EP668646
- DOI -
- Views 257
- Downloads 0
ANALISIS TERJADINYA SLIP PADA KOPLING DI UNIT SCANIA P 124 CB 8x4 NZ 420
In the operation of the unit whose successor does not use a hydraulic system, the role of the clutch is very important in transmitting power from the engine to the transmission. However, the clutch can only slip so that...
PEMELIHARAAN MESIN DISC MILL SENTRA PETERNAKAN RAKYAT (SPR) CINAGARBOGO
Sentra Rakyat Rakyat (SPR) is a collection of cattle breeders in the Subang Regency area. SPR aims to raise beef cattle and provide ruminant feed. Ruminant feed made from corn hump waste. The disc mill machine is used in...
ANALISIS PERANCANGAN ALAT KHUSUS UNTUK PEMASANGAN SUSPENSI BELAKANG PADA UNIT HD785-7
General Overhaul (GOH) is so much on the HD785-7 unit that it requires speed, accuracy, and discipline during the process so that the target can be met. Slow speed is influenced by several factors, one of which is the pr...
PENGARUH BENTUK BUKAAN TERHADAP KEKUATAN DAN GETARAN BALOK
Beam is widely used for building and mechanical structure. The beam characteristics must be able to answer the problem in field. In recent years, beam was made which compromised between stiffness and weight of beam. The...
SINTESIS FASA ɣ-Co PADA PADUAN Co26Cr6Mo0.18N DENGAN KOMBINASI METODE HOMOGENISASI 1200 oC DAN HOT ROLLING SERTA TRANSFORMASI STRUKTUR KRISTALNYA
Co-Cr-Mo alloy is a material that widely used for bioimplant in the medical field due to its corrosion resistance and mechanical properties. Structurally, recommended Co-Cr-Mo alloys for medical applications are ɣ-Co pha...