Analisis Transfer Daya pada Saluran Transmisi 150 kV dari Gardu Induk Air Anyir ke Gardu Induk Sungailiat PLN Area Bangka
Journal Title: Jurnal Ecotipe (Electronic, Control, Telecommunication, Information, and Power Engineering) - Year 2019, Vol 6, Issue 1
Abstract
The availability of sufficient and quality electrical energy is a demand that must be fulfilled by PT. PLN (Persero). Distribution of electricity through the 150 kV transmission line with a relatively long distance and using aluminum type conductive wire always experiences changes in current and voltage, giving rise to the ability to send electricity power unstable. Other influences can also be obtained from changes in power factor and phase angle. The method used is the method of analyzing equations in the form of hyperbolis. In this study shows that the power transfer ability is influenced by phase angles. The maximum active power transfer capability is 1962.71 kW on VS which is 150∠75⁰ and VR which is 150∠0⁰ with phase angle difference is 75⁰. Whereas in VS = 150∠75⁰ and VR = 145∠0⁰ the transfer ability of active power is 1911.97 kW with the difference in the same phase angle of 75⁰. This study shows that the transfer ability of active power is influenced by voltage. The maximum active power transfer capability for VR values = 150∠0⁰ at VS which is constant, which is 150∠90⁰ is 2134.49 kW. Whereas for the VR value = 145∠0 VS at VS which is constant which is 150∠90⁰ is equal to 2078.03 kW.
Authors and Affiliations
Diaz Dwiky Feranda, Asmar Asmar, Rudy Kurniawan
Keywords
Related Articles
- EP ID EP549341
- DOI 10.33019/ecotipe.v6i1.941
- Views 82
- Downloads 0
Analisa Pengendali Hybrid Sliding Mode Control dan Fuzzy Logic Controller dalam Penurunan Error Steady State Untuk Mengendalikan Concentration pada Isothermal Continuous Stirred Tank Reactor (CSTR)
Systems in industry often occur in performance or desired performance. One of them isothermal CSTR system where the system has not been able to work according to the desired set point 1 g.mol / litter, to achieve the set...
Perancangan Kontroler PID dan Sliding Mode Control untuk Kestabilan Hover pada UAV Trirotor
Previous research has been done to overcome the problems that occur in UAV Trirotor, one of which is the problem of the control stability . Stability control problems in the presence UAV Trirotor yaw moment caused by tor...
Penerapan Model K-Nearest Neighbors Dalam Klasifikasi Kebutuhan Daya Listrik Untuk masing-masing Daerah di Kota Lhokseumawe
Classification for electric power requirements for each region is very necessary in order to describe the power conditions needed This is very important for new customers to want to know the power provided, otherwise old...
Rancang Bangun Unipolar PWM untuk Pengendalian Rangkaian H-Bridge Menggunakan Operational Amplifier
Unipolar PWM control technique carried out by comparing triangular wave with two control voltages. The resulting pulses are used to control H-Bridge circuit. The technique can be done by using the functions of the operat...
Identifikasi Isyarat Suara Murmur Jantung Menggunakan Transformasi Forier Cepat Berbasis Jaringan Syaraf Tiruan
This research was to explore the merit of signal processing scheme in solving the identification problems of heart murmurs signal utilizing the available data from a number of Indonesia heart patients. The signal process...