Analysis of a Structure on Sloping Ground under Seismic Effects
Journal Title: International Journal for Research in Applied Science and Engineering Technology (IJRASET) - Year 2017, Vol 5, Issue 6
Abstract
The aim of this work is to make a study on seismic behaviour of reinforced concrete framed buildings with columns of unsymmetric plan within on storey. For this study an MS Excel sheet was developed in which 26 cases of varying slope by small increments which can formulate the mode shapes, bending moment, shear force, storey drift, base shear, etc.here we considered 0o,4.5o and 9o sloping ground. Considering different seismic zones II, III, IV and V with different soil types soft, medium and hard type. The results were compared. Using STAAD Pro v8i, 4 reinforced concrete frames on plane ground were modelled. Then the analysis was carried out for gravity as well as seismic loading. Models were created for the above cases when placed on sloped terrain. Comparison for various results like Axial force, shear force, moment stress in columns were done. The reinforcement detailing of all the above 8 models were done using STAAD Pro v8i. All the above mentioned models were modelled with element material. The volume ratio and orientation angles were entered as obtained from STAAD Pro v8i concrete design results. Monotonic loading was applied to the models and results like load displacement hysteresis curve, stress on members, deflected shapes, etc. were extracted. The results show that when a reinforced concrete framed structure is built on a sloping terrain, the short columns tend to fail easily. Shear cracking pattern appeared at the beam column joint of short columns. Long column being more ductile takes up lesser lateral force when compared to the short columns.
Authors and Affiliations
Ankita Mishra, Kapil Soni
Keywords
Related Articles
- EP ID EP24698
- DOI -
- Views 396
- Downloads 13
Memory Protection for Encoders in OLS Codes
Error correction codes (ECCs) are commonly used to look after memories next to errors. The proposed technique we are detect the one or more errors and to correct on its own bit error. Among ECCs, Orthogonal Latin Square...
Generation of Electricity through Atmosphere
In the recent years, we all are facing electricity crisis. It’s time to harness the renewableenergy resources of the nature. This article presents discussion on the atmospheric electricity, which can be generated by uti...
Large Deflection Analysis of Cantilever Beam Using Artificial Neural Networking
In this study the large deflection of the cantilever beam is analyzed under the action of point load at the free end of the beam. The large deflection of the cantilever beam causes the non linear behavior of beam. This...
slugInvestigation on the Effect of Process Parameters For EN31 material By EDM using full factorial method
This paper presents the results of experimental work carried out in electrical discharge machining (EDM) of EN31 using tool materials namely aluminium The machining process was carried out at three different supply curr...
Design & Implementation of High Speed Data Transmission
In this paper, we present a set of data encoding schemes aimed at reducing the power dissipated by the links of an NoC. The proposed schemes are general and transparent with respect to the underlying NoC fabric (i.e., t...