Analysis of Factors Affecting The Management of Overall Energy Efficiency of Tractor-Implement by Real-Time Performance Monitoring
Journal Title: Journal of Agricultural Machinery - Year 2014, Vol 4, Issue 2
Abstract
Overall energy efficiency (OEE) is an important indicator of energy consumption in tillage operations. Tillage energy was studied objectivity to accurately measure the OEE of MF399-4WD tractor. The tractor was equipped with different types of sensors to measure and calibrate the required data including: fuel consumption, actual forward speed, wheel speed and slippage, engine speed, draft and drawbar power. The data were recorded with frequency of 1000 Hz and transmitted by employing a suitable wireless technology in the range of up to1.5 km to the user's personal computer and is stored in Excel format. The hardware and the software program, which was written in C# language, simultaneously monitor the changes in functional parameters and the monitoring can be done even from far away and via the Internet. The split factorial experiment with three factors including ballast, selected gear ratio and two wheel drive configurations (two and four wheel drive) was employed to perform analysis of variance (ANOVA), POST ANOVA AND PATH ANALYSIS. The results show that the performance of remote monitoring devices installation was very accurate and high-quality. Furthermore, statistical analysis showed that three parameters including slippage, fuel consumption and tractor Power Equivalent (PEQ) were the most effective parameters on overall energy efficiency of tractors â tillage. The variance analysis showed that the effect of gear ratio and drive configuration on the OEE were also significant at the one percent level. However, ballasting had no significant effect on the OEE.
Authors and Affiliations
N. Kazemi,M. Almassi,H. Bahrami,M. J. Sheikhdavoodi,M. Mesgarbashi,
Keywords
Related Articles
- EP ID EP717717
- DOI -
- Views 41
- Downloads 0
Construction and Assessment of an on the Go Soil Electrical
The issue of soil salinity is one of the snags for increasing agricultural productivity, which must be inhibited by appropriate devise and scientific management. One way to identify salty areas of farm lands is to prepar...
Modeling and Optimization of the Grinding Cereals to Produce Poultry Feed in the Hammer Mill using Response Surface Method (RSM)
IntroductionThe most costly part of poultry breeding is feeding. Due to the noticeable developments in animal husbandry and agricultural sectors, it is necessary to use the mechanized methods to reduce the casualties, in...
Study on Agricultural Mechanization Indexes of Small Farms in Khorasan Razavi Province and Suggesting Possible Improvement
The major part of agriculture in Iran and especially in Khorasan province is yeoman farmers, and often the parts are less than one hectare. To evaluate the status of small farm mechanization (less than two hectares) in K...
Effect of Frequency and Vibration Time on Shaker Performance for Mechanized Harvesting of Orange (Thomson cultivar)
Manual citrus harvesting is commonly performing hard, expensive and time consuming. In this study, a factorial experiment with a completely randomized design in three replications was performed to find out the effect of...
Optimization and Analysis of a λ-Formed Straight Line Linkage for Design of Reversible Disk Plow.
Disk plows are one of the most important tillage tools. Two way (reversible) disk plows can perform continues plowing. So they can save time and costs and hence improve overall efficiency. In this study, a “two-way” disk...