Analysis of Fuzzy Controller Application Efficiency in Two-Mass Systems with Variable Moment of Inertia of Second Mass
Journal Title: Energy Engineering and Control Systems - Year 2016, Vol 2, Issue 2
Abstract
A two-mass system with variable moment of inertia of the second mass has been considered. Common approaches to controller synthesis of such system were considered. A fuzzy robust controller was introduced. Comparison of the proposed approach with the classic one has been conducted. Corresponding conclusions about the feasibility of the proposed approach were done. The cases of a system with dynamic reference and without it were considered. Besides, a linear and nonlinear behavior of the second mass of the system was taken into account. Obtained results testify that implementation of the proposed controlled can provide a significant gain in the transients of the investigated system.
Authors and Affiliations
Andrew Lozynskyy, Lyubomyr Demkiv
Keywords
Related Articles
- EP ID EP256967
- DOI 10.23939/jeecs2016.02.059
- Views 92
- Downloads 0
Simplified Method for Calculation of the Joule–Thomson Coefficient at Natural Gas Flowrate Measurement
This work deals with measurement of natural gas flowrate and volume by means of pressure differential devices. The existing methods for calculation of Joule-Thomson coefficient to be applied in pressure differential flow...
Heat Stability in Exterior Walls in the Summer
One of the main parameters that determine room climate is the internal temperature therein, which depends on projected external construction of the building. So, first of all, the article analyzes the heat resistance of...
Simulation of Dynamic Processes of Gas Flow in Collector Systems
By using CFD-simulation, plug length simulation of local resistance type plugged tee, which changes the flow direction, using equations of hydrodynamics was carried out. During simulation, velocity of medium in the threa...
Identification of Controlled Plant and Development of Its Model by Means of PLC
The results of experimental and theoretical investigation of dynamic and static characteristics of a thermal object (electric oven) as a controlled plant are presented in the paper. The up-to-date microprocessor instrume...
Method of Selecting the Speed of Jack Pump Driving Motor Based on Reservoir Flow Rate
The sucker-rod oil pumping unit productivity is influenced by lots of factors, including the operation mode of the jack pump electric drive system. Settings of the electric drive system affect the system’s energy indicat...