Analysis of integrated management system of the quality, environment and occupational safety
Journal Title: Journal of Achievements in Materials and Manufacturing Engineering - Year 2016, Vol 78, Issue 2
Abstract
Purpose: In this article the analysis of integrated management system of quality,environment and occupational health and safety was presented. The functioning of suchsystem on the selected enterprise was discussed.Design/methodology/approach: The new standards of PN-EN ISO 9001:2015, PN-ENISO 14001:2015 were presented. Also, the occupational health and safety managementsystem according to the new ISO 45001 standard was shown. The necessity of themanagement systems integration was presented.Findings: In this paper the changes in PN-EN ISO 9001:2015, PN-EN ISO 14001:2015 werepresented. The advantages and disadvantages of the integrated management system in theselected enterprise were shown.Practical implications: The most important changes in ISO standards for quality,environment and occupational health and safety were presented. There is also significantto show the faults in implementation and operation of the integrated management system,what will protect other organizations before such problems.Originality/value: In this paper indicated that only proper implementation of the integratedmanagement system based on PN-EN ISO 9001, PN-EN ISO 14001 and PN-N-18001 couldprovide real benefits. Otherwise, it is an unnecessary waste of time and money.
Authors and Affiliations
A. Kania, M. Spilka
Keywords
Related Articles
- EP ID EP189322
- DOI -
- Views 135
- Downloads 0
Nano-structured (Mo,Ti)C-C-Ni magnetic powder
Purpose: The paper presents the results of phase composition and magnetic properties of Mo-Ni-Ti-C nanostructured powders. The aim of this research is understanding the correlation between key magnetic properties and the...
Influence of manufacturing technology on tribological properties of A390.0 alloy
Purpose: In this paper, results of tribological studies on AlSi17Cu5Mg alloy subjected to amodification (CuP10) and a significant overheating above Tliq are presented, referring themto the starting material.Design/method...
Some aspects of the determination of retained austenite using the Rietveld refinement
Purpose: The aim of the paper is to show the advantage of the application of the Rietveldrefinement for determination of retained austenite amount in multiphase microstructure steels.Design/methodology/approach: The stee...
The effect of filter type on filling during Low Pressure Die Casting: a numerical study
Purpose: Purpose: Effect of filter types on filling during low pressure die casting researched to find optimal filtration design for wheel casting process. Design/methodology/approach: Three types of filters, which...
Electrospinning of PAN and composite PAN-GO nanofibres
Purpose: The aim of this study was to present the influence of used reinforcement phase – graphene oxide (GO) and the electrospinning process parameters (the distance between the nozzle and collector) on the morphology a...