Analysis of Losses in Brushless Direct Current Motors and Their Influence upon Operation Characteristics
Journal Title: ANALELE UNIVERSITATII DIN CRAIOVA - Seria Inginerie electrica - Year 2018, Vol 42, Issue 0
Abstract
Researches regarding the optimum design and construction of brushless direct current motors are very present, owing to their use in small-dimension vehicles (electrical scooter, electrical bicycle, motor-scooters, electrical vehicles for disabled passengers). Motors used in two-wheel or four-wheel conveyances are permanent magnet direct current motors, manufactured by brushless technology. The operation, starting and speed control characteristics of the brushless direct current motor designed must correspond to certain conditions of competitiveness and to high exigencies imposed by the complex equipments used in passengertransport vehicles. The study carried out and the simulations presented aim at identifying the important losses in order to reduce them. The widespread use of command electronics associated with power components, in brushless direct current motors supply, enabled the optimization of their operation, with special performances. In this paper there is presented the revised computation relation for iron losses, known in design, by establishing separately the two components: hysteresis losses and eddy-current losses. This way, the efficiency obtained in the design stage gets close to the experimentally established efficiency, the error being less than 2%.
Authors and Affiliations
Monica Adela Enache, Aurel Campeanu, Ion Vlad, Sorin Enache
Keywords
Related Articles
- EP ID EP433046
- DOI -
- Views 134
- Downloads 0
Considerations about the Development of Protective Devices on the Increase Safety in Exploitation of the Electric Power Transformers
Installations and devices of the protection, mounted on transformer, are: oil conservator, gas relays, thermo-siphon filters, air filters, safety valves and thermal image (thermo-copy). Here are some contributions to the...
DIGITAL EQUIPMENT FOR THE TEMPERATURE CONTROL INSIDE AN ENCLOSURE. THE HARDWARE AND SOME EXPERIMENTAL RESULTS
The paper deals with an experimental hardware platform designed to implement and test different control algorithms for the temperature inside a thermal enclosure. The equipment was designed in a modular way and its main...
DC-Traction Substation with Improved Power Quality and Regeneration Capability
In the DC-traction substations, the diode rectifi-ers are commonly used to provide the needed DC-voltage for vehicles. Unfortunately, they attract important issues of power quality, of which the most significant is the i...
Considerations Relating to the Effectiveness of the Float Installed Inside the Conservatory of Oil to Electrical Power Transformers
Protection of the electroinsulating oil against oxidation, constitutes one aspect investigated to increase safety in the operation of the electric power transformers. Oxidation is a chemical reaction between transformer...
Three Dimensional Numerical Solution for Maximum Magnetic Field of 21 kJ Superconducting Magnetic Energy Storage Device
To develop an optimized configuration of superconducting magnetic energy storage (SMES) device concerning the volume of the superconducting material and its cost, a two-dimensional numerical model was created in [11] usi...