Analysis of Mechanical Properties of the “Bearing” Part Based on Polished Samples
Journal Title: Strojnicky casopis - Journal of Mechanical Engineering - Year 2017, Vol 67, Issue 2
Abstract
Presented work describes the use of algorithm for the computation of thermo-elastic properties of randomly reinforced composite which is based on histogram from image analysis done on ITAM, CAS. Three polished samples from “Bearing” part were analyzed. Results are used for verification of the algorithm functionality and primarily for computation of thermo-elastic properties which were compared with each other and used in modified FE analysis.
Authors and Affiliations
Zdeněk Padovec, Radek Sedláček, Milan Růžička and Pavel Růžička
Keywords
Related Articles
- EP ID EP43919
- DOI https://doi.org/10.1515/scjme-2017-0021
- Views 203
- Downloads 0
A Closed-Form Buckling Formula for Open-Coiled and Properly Supported Circular-Bar Helical Springs
As a continuation of the author’s previous studies on the buckling analysis of helical springs, a closedform formula having been obtained with the help of the artificial neural network (ANN) is proposed and discussed in...
Numerical Calculation of Overhead Power Lines Dynamics
This paper contains results of transient analysis of airflow around the ACSR power line cross-section in unsymmetric multi-span. The forces applied to the power line are obtained from CFD simulations, where the wind in...
Geometrically Similar Rectangular Passive Micromixers and the Scaling Validity on Mixing Efficiency and Pressure Drops
In the present work, two geometrically similar passive geometries with dumbbell shape were designed to perturb the dominating viscous forces in the low Reynolds number (Re) flows of the fluids. The geometries were desi...
Hydrodynamic Properties of High Temperature Natural Circulating Helium Cooling Loop
The paper deals with the hydrodynamic properties, i.e. the consumption of mechanical energy expressed by pressure drops within a helium loop intended for the testing of decay heat removal (DHR) from the model of a gas-...
Fem Simulation of Thermal Cycles During Laser Welding of Aluminium
The submitted paper deals with the simulation of thermal cycles during laser welding of aluminum sheets using Finite Element Method (FEM). After the design and creation of the simulation model, the simulation results w...