Analysis of Multipurpose Buildings with Infill Walls
Journal Title: International Journal for Research in Applied Science and Engineering Technology (IJRASET) - Year 2015, Vol 3, Issue 6
Abstract
It is common practice by structural engineer to consider the infill panels as non-structural member and their stiffness contribution in structure is neglected. A multipurpose building is one which can be used for more than one purpose. Generally they vary in bay width and position of infill panels. In this study the effect of selected parameter i.e. height of building, number of bays, time period and change in position of infill panels of a RC building were investigated. 19 Structures were analyzed using SAP2000. It was observed that with the increase in number of bay the base shear capacity of structure also increases and the ductility of structure reduces. Time period of structure reduces with increase in number of bay and height of structure. Also with the change in position of infill panels in different floors the variation in capacity of structure was observed due to stiffness irregularity.
Authors and Affiliations
Shriyanshu Swarnkar, Dr. Debarati Datta
Keywords
Related Articles
- EP ID EP20886
- DOI -
- Views 272
- Downloads 4
1-Φ High Step-Up Converter with MB MPPT for Half-Bridge PV Inverter System
In this paper a 1-ϕ high step-up converter with model based mppt for half-bridge inverters is proposed. The high stepup converter not only boosts the relatively low photovoltaic voltage to high bus voltage but also offer...
A Novel High Voltage Gain Boost-Fly backForward Converter with Voltage Multiplier Cell for Solar Fed Induction Motor Drive Application
A high voltage gain boost-fly back converter with voltage multiplier cell is proposed in this paper to avoid the exceptionally slight turn-off period and to decrease the current ripple. The voltage multiplier unit is co...
Implementation of Split Ring Resonators Instead Of Photovoltaic Cells in Solar Panels
This paper focuses on implementation of split ring resonators instead of conventional Photo voltaic cells in solar panels. Split Ring resonators are artificially produced structure common to metamaterials. This purpose...
Analysis of Contamination of Ground Water Due to Dump Yard: Case Study of Bhandewadi Dump Yard, Nagpur, India
In developing countries and modern cities, generation of waste is increasing day by day due to modernization in lifestyle of people. Proper collection of waste and its management, treatment and disposal is a measure con...
Thermal Analysis of Exhaust Heat Exchanger in Automobile Thermo Electric Generator
By the view of increasing fuel costs and environmental issues, it is a requirement to manage the power utilization. In here it is mere focus on the automobile that, they take major contribution out of all power produced...