Analysis of Silicon Clad Optical Waveguide for High Extinction Ratio TE/TM Pass Polarizers using Resonant Coupling between Guided Modes and Lossy Modes
Journal Title: IOSR Journals (IOSR Journal of Electrical and Electronics Engineering) - Year 2017, Vol 12, Issue 3
Abstract
Attenuation characteristics of a planar silicon-clad ion exchange glass waveguide structure are investigated theoretically at the optical wavelength of 0.6328 µm. An oscillatory behaviour of the attenuation curves is noticed in the proposed four layer structure. It is observed that by varying the thickness of silicon cladding layer, the TE or TM propagating modes may be selectively attenuated. This characteristic can be used to design a high extinction ratio and low insertion loss TE or TM pass polarizer. For the analysis of both polarizations, effective indices are calculated at various thicknesses of Silicon cladding layer using Transfer Matrix Method (TMM). At an optimum Silicon thickness, polarizer parameters like insertion loss and extinction ratio are calculated and tabulated. This paper provides rigorous analysis for silicon clad waveguide polarizer parameters for TE as well as TM polarization using same structure. A TM pass polarizer with extinction ratio of about 690 dB and insertion loss of about 2.8 dB and a TE pass polarizer with extinction ratio of about 289 dB and insertion loss of about 1.5 dB is proposed for a length of 1mm.
Authors and Affiliations
Rakesh Saini, Manoj Kumar, Anil Kumar, Geeta Bhatt, Manoj K. Khanna, Avinashi Kapoor
Efficient Image Encryption Approach Based on Chaos Technique
Image encryption is one of the most common and important method of image data encryption. Image encryption deals with applying image encryption algorithms to the sending image and convert it into cipherimage, and only au...
Hydro Power Generation In Nigeria, Environmental Ramifications
Electricity is the bedrock of every nation development and can be transported instantaneously & pollution free at consumer end. There are three hydro power generating stations that contribute to the nation’s grid, namely...
Effect of Service Quality and Infrastructure Facilities on Competency of Nautical Cadet in Maritime Simulator
The need for educational equipment, especially the simulator in this STCW convention. Not always explicitly written in either type or specification, but depicted in competency forms that must be achieved through a partic...
Operation Planning of a Local Energy Supply System with a CCHP
This paper presented an advent combined cooling, heating and power (CCHP) system which has provided the opportunity for in-house power backup for meeting the energy demands of Institutional sectors. Since energy demands...
Solution for Improving the Frequency of Operation of Metro Rail
Automation is the use of control systems for operating equipment such as machinery, steering and otherapplications with minimal or reducedhuman intervention. The system explained in thisresearchpaperworks on driverless o...