Analysis of smoke generating properties of selected samples of wood and wood-based materials
Journal Title: Annals of WULS, Forestry and Wood Technology; Zeszyty naukowe SGGW - Year 2017, Vol 99, Issue
Abstract
Analysis of smoke generating properties of selected samples of wood and wood-based materials. As regards safety, wood is a flammable material, and its ignitability and smoke generation depend to a large extent on its chemical composition, density and thickness of element. Smoke emission is one of basic elements that characterise the fire environment. Consequently the objective of the paper was to carry out a comparative analysis of smoke generation of wood-based materials and wood at selected thermal expositions and at the presence or absence of a stimulus igniting the volatile gaseous phase (pilot flame). For needs of experimental research use was made of: samples (oak and pine) and wood-based materials (MDF boards, OSB, chipboard, laminated chipboard). Experimental research has been carried out based on the standard PN ISO 5659 – 2:2013- 06.
Authors and Affiliations
Marzena Półka, Bożena Kukfisz
Keywords
Related Articles
- EP ID EP349523
- DOI -
- Views 80
- Downloads 0
Finite element analysis of wood adhesive joints
Finite element analysis of wood adhesive joints. Engineered wood products such as glulam or cross-laminated timber are widely established in the construction industry. Their structural behaviour and reliability clearly b...
Influence of the raw material properties on the liquefied wood chemical composition
Influence of the raw material properties on the liquefied wood chemical composition. The subject of the studies was to investigate the effect of raw material used for the liquefaction process on the liquefied wood chemi...
Effect of spent coffee grounds additions on the mechanical properties of the epoxy composites
Effect of spent coffee grounds additions on the mechanical properties of the epoxy composites. A commercial epoxy system was doped with spent coffee grounds (SCG) as filler. The effect of SCG on the mechanical properties...
The effect of tree slenderness on wood properties in Scots pine. Part I: Basic density and compression strength parallel to grain
The effect of tree slenderness on wood properties in Scots pine. Part I: Density and compression strength parallel to grain. The aim of this study was analyse the variability in basic density (Qbd) and compression streng...
Problems related to renovation of timber roof trusses of an industrial hall dating back to the first half of the 20th century
Problems related to renovation of timber roof trusses of an industrial hall dating back to the first half of the 20th century. The paperdescribes the technical condition of timber trusses of anatypical roof covering of a...