Analysis of Switched Boost Inverter for Induction Machine Drive Application
Journal Title: International Journal for Research in Applied Science and Engineering Technology (IJRASET) - Year 2015, Vol 3, Issue 3
Abstract
Recently, developments in power electronics and semiconductor technology have lead improvements in power electronic systems. The Switched Boost Inverter is a single stage dc-ac converter, whose output voltage can be either greater or less than its input dc voltage. This converter can offer both dc and ac loads, simultaneously. Also, this converter allows shootthrough of the inverter legs without causing any damage to the converter. In this paper, the principle of operation of the Switched Boost Inverter is explained. Also, a Pulse Width Modulation (PWM) control strategy for the Switched Boost Inverter is formulated and implemented using a simple analog circuit. These inverters use a unique impedance network, united between the power source and converter circuit, to offer both voltage buck and boost properties, which cannot be obtained by conventional voltage-source and current-source inverters. In this work the switched boost inverter is applied to induction machine drive. The simulations results are obtained by MATLAB/SIMULINK software.
Authors and Affiliations
B. Apurupa, D. T. Ramya Sai, D. Harish
Keywords
Related Articles
- EP ID EP19691
- DOI -
- Views 276
- Downloads 7
Performance Evaluation of Wideband Semiconductor Optical Amplifier
In this paper, we investigate and evaluate the Semiconductor Optical Amplifier (SOA) performance as a function of the intrinsic and extrinsic parameters. We build a model in the optisystem ( tool )than set the intrinsic...
slugA Survey on State-of-Art Flip-Invariant Descriptors
In image processing , flip operation creates the mirror o f an image. Flip is common copyright infringement technique used in creating near - duplicate videos, since it will not change the video...
Comparison of leach and energy efficient protocol
Wireless Sensor Network (WSN) consists of spatially distributed autonomous sensors to monitor physical or environmental conditions, such as temperature, sound, vibration, pressure, motion or pollutants and to cooperativ...
Optimization of Different Machining Parameters of En 354 Alloy Steel In CNC Turning Operation Using Taguchi Method
The objective of this experimental study is to develop a single optimization method for lower surface roughness and maximum metal removal rate in terms of process parameters while carrying out CNC turning operation. The...
Comparative Studies on Methods of Tannase Assay
Five bacterial cultures were isolated from the tannery effluent and were screened by plate assay method. Three different methods mainly Colorimetric, UV spectrophotometric and Spectrophotometric methods were selected fo...