Analysis of Temperature Resistance of Pressurized Cylindrical Fuel Tanks
Journal Title: HIDRAULICA - Year 2018, Vol 0, Issue 1
Abstract
In this study, an approach based on Finite Element Modeling (FEM) was applied to analyze the performances of three different pressurized cylindrical fuel tanks with the same lateral cover, but with various head covers geometries. A specific mechanical and thermal model based on FEM was developed. A particular analysis of temperature resistance was carried out, to define specific key performance indicators and to determine the advantageous form of tank with the minimum stress state and linear deformation.
Authors and Affiliations
Mihai TALU, Stefan TALU
Keywords
Related Articles
- EP ID EP482995
- DOI -
- Views 220
- Downloads 0
Numerical Simulation of Thermal Processes Occurring at Testing Hydrostatic Pumps in Cavitation Mode
This article refers to the use of infrared thermography in the predictive maintenance of hydraulic drive systems. Based on experimental research on the temperature evolution in a hydraulic system which operates in cavita...
Water Flow Transition on a Hydropower Virtually Developed Sector of Bârzava River in the Town of Resita
A water flow numerical modelling is developed on the paper for a given sector on Bârzava River where a hydropower associated deviation is assumed, in case of accidental high waters in the Town of Reșița. The model includ...
Automatic Electro-Hydraulic System for a P.E.T. Waste Baling Press
Environmental protection is one of the leading factors when designing modern industrial machinery, their increased overall energy efficiency requiring the use of new industrial design concepts, smart driving circuits and...
Technological and Constructive Considerations on the Realization of Components and Parts Using 3D Printing FDM-Type Technology
The work is addressed both the constructive considerations and the analysis of specific deformations generated by gaseous or liquid medium on specific components of the pneumatic or hydraulic installation. The work is st...
Studying the Influence of River Works on River Flow Regime with 1-D Hydraulic Modelling
The one-dimensional (1-D) hydraulic models are the most adequate for river modelling flow. This case study involves the rehabilitation of the CFR bridge, km 38 + 389, line 116 DII Simeria - Petrosani at Ruşor town, Huned...