Analysis of the possibility of estimation slags propriety with use the database
Journal Title: Archiwum Odlewnictwa - Year 2009, Vol 9, Issue 2
Abstract
This article contains information concerning the analysis of the possibility of defining refinery qualities of slag based of the thermophysical and thermodynamical data. The isues presented deals not only with refining copper and melting stages, but also the idea of building an optimization program. In its assumption the program is supposed to check and search specific data very quickly on the particular types of slag.
Authors and Affiliations
S. Biernat, A. W. Bydałek
Keywords
Related Articles
- EP ID EP70453
- DOI -
- Views 131
- Downloads 0
The comparative studies of ADI versus Hadfield cast steel wear resistance
The results of comparative studies of wear resistance of ADI versus high manganese Hadfield cast steel are presented. For evaluation of wear resistance three type of ADI were chosen. Two of them were of moderate strength...
Morphology of graphite precipitates in austenitic ductile iron
The final mechanical properties of cast iron depend on the nature and properties of the matrix and on the morphology of graphite precipitates. The article presents the results of studies of the structure of austenitic du...
The influence of remelting parameters of the electric arc and conventional tempering on the tribological resistance of high speed steel HS 6-5-2
The present thesis depicts the results of the research of tribological high speed steel HS 6-5-2 remelted with the electric arc. Steel was remelted with different parameters. The amperage of electric arc was changed, the...
Energy-Consumption Factors of Air-Stream Moulding Machines
In this article, an outline of the key questions connected with the essential problems of energy-consumption of air-stream moulding machines has been presented. Research results and calculations of requisite parameters a...
Refining processes of selected copper alloys
The analysis of the refining effectiveness of the liquid copper and selected copper alloys by various micro additions and special refining substances – was performed. Examinations of an influence of purifying, modifying...