ANALYSIS OF THE PROPERTIES OF NEW GROUPS OF COATINGS APPLIED IN HIGHLY LOADED MACHINE COMPONENTS
Journal Title: Scientific Journals of Silesian University of Technology. Series Transport - Year 2014, Vol 2014, Issue 82
Abstract
The paper presents an overview of new groups of tribological coatings with complex microstructure deposited by PVD (Physical Vapour Deposition) and CVD (Chemical Vapor Deposition) techniques. The results of microstructure studies (TEM), mechanical and tribological properties of nanocomposite coatings nc-Cr2C/a-C:H and multilayers 16x(Ti/TiN) were shown. The properties of these modern coatings are compared with the properties of two single coatings a-C:H and TiN. All coatings were deposited by magnetron sputtering on AISI 304 steel substrates. The hardness, elastic modulus and adhesion to the substrate studied by scratch testing were compared. The results showed the possibility of improving the wear resistance of the nanocomposite and multilayer coatings in comparison with conventional single coatings currently used in the machine industry.
Authors and Affiliations
Kinga CHRONOWSKA, Marcin KOT, Łukasz MAJOR
MOŻLIWOŚĆ WYKORZYSTANIA TECHNIKI LASEROWEJ I MIKROJETOWEJ W SPAWANIU ELEMENTÓW KONSTRUKCJI POJAZDÓW
W artykule zaprezentowano możliwość spawania laserowego z wykorzystaniem chłodzenia mikrostrumieniowego. Przedstawiono wpływ chłodzenia mikrostrumieniowego na strukturę i własności mechaniczne złącza. Analizowano nowy pr...
ANALYSIS OF MOVEMENT RESISTANCE OF CONVEYOR BELT AND ROLLERS IN THE COAL MINE MYSŁOWICE-WESOŁA
The paper presents a study of new design of SAG rollers. The study focused on the measurement of static and dynamic resistance of rotating rollers and the impact of new construction on the power consumption of the convey...
APPLICATION OF ACOUSTIC MAPS IN THE ANALYSIS OF ACOUSTIC SCREENS EFFICIENCY ON THE SECTION OF NATIONAL ROAD NO.94 IN DABROWA GÓRNICZA
Acoustic map allows for graphic illustration of acoustic climate on a given area. It is made after calculation and measurement of noise coming from various sources of noise. Their location and acoustic parameters should...
WPŁYW ZMIAN STANU TECHNICZNEGO AMORTYZATORÓW NA ICH CHARAKTERYSTYKI TŁUMIENIA
W artykule przedstawiono indykatorowe metody pomiaru charakterystyk tłumienia amortyzatorów hydraulicznych samochodów osobowych. W badaniach wykorzystano stanowisko badawcze znajdujące się w Laboratorium PTP Wydziału Tra...
ESTIMATION OF THE ABILITY TO USE A MASS OF AIR FROM A MOVING VEHICLE IN WIND TURBINE PROPULSION
This work presents division and classification of wind turbines according to the location of the axis of rotation and generated power. The work introduces applications of the wind turbines in electric energy generation w...