ANALYSIS OF THE SPECIAL FEATURES OF THE THERMAL PROCESS IN AN INDUCTION GENERATOR AT HIGH SATURATION OF THE MAGNETIC SYSTEM
Journal Title: Електротехніка і Електромеханіка - Year 2017, Vol 0, Issue 3
Abstract
Purpose. Development of the method for the assessment of the thermal operation modes of an autonomous electrical power sys-tem with an induction motor, aiming at improvement of the reliability of electricity supply and the quality of electric energy. Methodology. Induction generator mathematical modeling taking into account the magnetic system saturation was used in the research. A heat model taking into account the excess of the temperature of the induction generator units in the mode of high saturation was developed. The obtained results were compared with the experimental data. Results. The paper contains the solu-tion to the problem of improvement of the mathematical model sand methods for steel losses determination in there search of the operation modes of an autonomous uncontrolled induction generator taking into consideration the properties of the magnetic system in the mode of high saturation. The expression for determination of steel losses in the mode of high saturation is obtained. It enables the assessment of the induction generator thermal condition. Originality. The analytical dependence for the calculation of the steel losses in the mode of magnetic system saturation has been obtained for the first time. Practical value. The obtained expression for the calculation of the steel losses can be used for determination of the admissible time of generator operation at overload. It will allow avoiding broken winding insulation and complete use of the generator overload capacity. As a result, it will reduce possible irregularities of electricity supply due to the generator preliminary cutoff.
Authors and Affiliations
Vladimir Chenchevoi, Iurii Romashykhin, Zhanna Romashykhina, Atef S. Al-Mashakbeh
Keywords
Related Articles
- EP ID EP292778
- DOI 10.20998/2074-272X.2017.3.02
- Views 96
- Downloads 0
ON THE ISSUE OF DESIGN OF GROUNDING SYSTEMS OF 330(220) KV SUBSTATIONS TO ENSURE THE ELECTROMAGNETIC COMPATIBILITY OF SECONDARY CIRCUITS
Purpose. The purpose of the work is to develop the fundamentals of the design methodology of grounding system design of substations with open switchgears 330 (220) kV, which is aimed at ensuring electromagnetic compatibi...
SINGLE-CIRCUIT ACTIVE SCREENING OF MAGNETIC FIELD GENERATED BY SEVERAL OVERHEAD TRANSMISSION LINES IN RESIDENTIAL AREA
Purpose. The synthesis of active screening system of magnetic field, generated by several high voltage overhead transmission lines, with the help of single compensation cables is presented. Methodology. The initial param...
AN ANTHOLOGY OF THE DISTINGUISHED ACHIEVEMENTS IN SCIENCE AND TECHNIQUE. PART 34: DISCOVERY AND STUDY OF QUANTUM-WAVE NATURE OF MICROSCOPIC WORLD OF MATTER
Purpose. Implementation of brief analytical review of the basic distinguished scientific achievements of the world scientists-physicists in area of discovery and study of quantum-wave nature of physical processes and phe...
COMPARATIVE ANALYSIS OF WEIGHT AND COST INDICATIONS OF INDUCTION MOTORS WITH CYLINDRICAL AND AXIAL AIR GAPS
Purpose. To find the analytical expressions of determining the optimum geometric dimensions by criteria of the weight minimum and the cost minimum of axial field squirrel-cage induction motors and to compare traditional...
MILITARY AND POLITICAL ASPECTS OF ONE OF THE PROBLEMS OF THE MODERN POWER INDUSTRY
The problem of Intentional Destructive Electromagnetic Impacts (IDEI) on power systems has become recently more and more actual in connection with two modern trends: the extension of using microelectronics and microproce...