ON THE ISSUE OF DESIGN OF GROUNDING SYSTEMS OF 330(220) KV SUBSTATIONS TO ENSURE THE ELECTROMAGNETIC COMPATIBILITY OF SECONDARY CIRCUITS
Journal Title: Електротехніка і Електромеханіка - Year 2018, Vol 0, Issue 5
Abstract
Purpose. The purpose of the work is to develop the fundamentals of the design methodology of grounding system design of substations with open switchgears 330 (220) kV, which is aimed at ensuring electromagnetic compatibility of secondary circuits of current transformers. Methodology. To carry out the research, the provisions of the theory of experiment planning, the theory of electrical circuits, mathematical modeling in the package Grounding 1.0 and Microsoft Excel were used. Results. During the one-factor experiments, the dependencies of the grounding system resistance and the voltage between the calculated points on the grounding system area, the size of the grid cell, the perimeter of the grounding system horizontal electrodes cross-section, the equivalent soil resistivity, the short-circuit current and the design factor were obtained. It is shown that the grounding system resistance and the voltage between the calculated points are practically independent of the depth of the horizontal electrodes in the depth range from 0.4 m to 1.4 m. Originality. The paper formulated three criteria for grounding system designing of substations 330 (220) kV, aimed at ensuring electromagnetic compatibility of secondary circuits. Practical value. The fundamentals of the methodology for grounding system designing are formulated according to the criterion of preventing false triggering of relay protections in emergency modes.
Authors and Affiliations
O. Yu. Glebov, D. G. Koliushko, G. M. Koliushko, E. P. Eremeeva
Keywords
Related Articles
- EP ID EP494974
- DOI 10.20998/2074-272X.2018.5.11
- Views 118
- Downloads 0
POWER FREQUENCY TECHNOGENIC MAGNETIC FIELD REDUCTION BY ACTIVE SCREENING IN SYSTEM SYNTHESIS IN AREA BASED ON STOCHASTIC MULTI-AGENT OPTIMIZATION
Purpose. Development of a method of synthesis of systems of active screening of technogenic power frequency magnetic fields within a given region of space, as well as the synthesis and performance evaluation systems synt...
INCREASE OF ENERGY EFFICIENCY OF TESTING OF TRACTION ELECTRIC MACHINES OF DIRECT AND PULSATING CURRENT
The results of the analysis of the effect of the load current of traction electric machines when tested for heating on the total electricity consumption for the test are presented. It is shown that increase of load curre...
A TECHNIQUE OF MEASURING OF RESISTANCE OF A GROUNDING DEVICE
Introduction. Measurement of resistance of the grounding device (GD) by means of a three-electrode system. This requires not only the right choice of installation locations of measuring electrodes, but also the determina...
ELECTROMECHANICAL PROCESSES IN A LINEAR PULSE-INDUCTION ELECTROMECHANICAL CONVERTER WITH A MOVABLE INDUCTOR AND TWO ARMATURES
Purpose. The purpose of the paper is to determine the influence of the height of the mobile and stationary disk electrically conductive armatures covering the movable inductor on the electromechanical processes of linear...
EFFICIENCY EVALUATION TECHNIQUE OF THE SEMICONDUCTOR DC-DC CONVERTER APPLICATION IN THE POWER-SUPPLY SYSTEM
Purpose. To specify efficiency evaluation of the DС-DC power semiconductor converter application in the power-supply system. Methodology. We have chosen application version of converter and then used the statistical mode...