ANALYSIS OF THE TEMPERATURE VALUE IN CONTACT STEEL – SOIL MATERIAL IN RELATION TO THE TYPE OF CONSTRUCTION MATERIAL
Journal Title: Tribologia - Year 2018, Vol 279, Issue 3
Abstract
The article presents a study of the friction temperature at the contact soil soil-material. For the tests, samples of 38GSA steel padded with El-Hard 63 electrode and Hardox 600 steel were selected. The experiment was carried out in laboratory conditions using the “rotating bowl” method in two soil types with different humidity. For light soil abrasive, the change in humidity increased the mass consumption in the wet soil almost twice for Hardox 600 steel and 1.5 times for the steel 38GSA welded. However, in the middle soil, the 38GSA steel was characterized by a higher wear value. The research shows that there were significant differences in consumption between the tested materials.<br/><br/>
Authors and Affiliations
Jerzy NAPIÓRKOWSKI, Magdalena LEMECHA
Keywords
Related Articles
- EP ID EP403196
- DOI 10.5604/01.3001.0012.7016
- Views 52
- Downloads 0
METODY MODYFIKACJI OLEJÓW ROŚLINNYCH W CELU UZYSKANIA BAZY OLEJOWEJ
W artykule przedstawiono wyniki badań, których celem było opracowanie nowej metody modyfikacji olejów roślinnych w celu otrzymania bazy olejowej o pożądanych właściwościach fizykochemicznych, które umożliwią zastosowanie...
A 3D ANALYSIS OF GEOMETRICAL SURFACE STRUCTURE IN TRIBOLOGICAL TESTS
TRIBOLOGICAL PROPERTIES OF N-ALCOHOLS, N-ALKYLPHENYLS AND GLYCOLS ALKOXY DITHIOPHOSPHATES IN FRICTION CONTACTS: STEEL–STEEL, AL2O3–AL2O3 AND STEEL–AL2O3
The zinc di-n-alkyko(arylo)ethoxyditiophosphates, a new class of organodithio- phosphorous compounds(ZEDPs) with low phosphorous, low ash contents and high thermal stability have been prepared, they are very good AW/EP a...
The wear mechanism in heavy-loaded lubricated coated/steel sliding contacts
The wear mechanism of the coating/steel tribosystem compared with that for conventionally used steel/steel friction contacts under sliding conditions lubricated with base oil with various concentrations of extreme pressu...
PROPERTIES OF CUTTING TOOLS WITH CERAMIC/CERAMIC MULTILAYERS
Cutting tools for High Speed Machining (HSM) work under high stress and in high temperature. Additional machining processes are lead without cutting fluids that cause significant wear on the tool rake face. These high me...