Analysis of the waste amount in mechanical engineering and metallurgy in Ukraine
Journal Title: Вісник Тернопільського національного технічного університету - Year 2015, Vol 79, Issue 3
Abstract
Different metallurgical industries, which are characterized by formation of a large amount of wastes have been analysed. Most of them within the meaning of useful components are competitive in raw materials and can be used in technological processes, so it is advisable to develop a control system for the formation of wastes of metallurgical industries to ensure their use in current manufacturing processes. The content of iron in the solid phase of secondary clarifiers sludge in metallurgical industries reaches 70%, but sludge contains 30% of water-oil content, that makes it difficult to transport, store and utilize. Typically, wastes of metallurgical and metal processing industries in percents are as follows: slag – 57 - 63; mineral wastes (scrap refractories and input components) - 4 - 6; scrap metal - 15 - 17; dust, sludge, sinter wastes - 9 - 13; others - 2 - 4. Thus, for example, specific output of sludge in productions of Ukraine is 60-80 kg/t of steel, in Europe this index is 30 kg/t. Metallurgical enterprises of Ukraine have accumulated 240 million tons of slag, 128 million tons of which are steel-smelting. A significant amount of sludge in wastes of metallurgical and metal processing industries contain from 45% to 52% of iron, 6,0-9,5% of carbon with a small amount of zinc (0,5-4%). This raw material can be used in the agglomeration and in converter steel production. However, 90% of wastes after various metallurgical processes are put together in same sludge storages where they are stored. A storage of sludge, steel and metal processing wastes of productions leads to the fact that richer for the mass fraction of iron sludge depletes due a contact with less rich with iron sludge. Another disadvantage is environmental. The paradox of the situation is that we create a man-made iron-containing materials, in which the mass fraction of iron exceeds its concentration in the rich iron ore which we take from the depths (56-60%), and glandular concentrates which we get on concentrators (65-68%). Organization of the process of waste monitoring will solve environmental problems, reduce production costs, reduce the consumption of mineral-raw resources.
Authors and Affiliations
Viktor Rud', Ihor Saviuk, Ludmyla Samchuk, Yulia Povstyana
Keywords
Related Articles
- EP ID EP571187
- DOI -
- Views 33
- Downloads 0
Synthesis of digital radio receiver system for secure communication with frequency-hopping spread spectrum
It was represented the results of synthesis and modeling of work of digital receiver based on the digital down converter (DDC), and a digital signal processor (DSP), which are used to process received signals. The method...
Investigation of influence of the metal corrugated pipe diameter on its stress-strain state
Metal corrugated structures require both high design quality and quality of construction. Significant contribution to the damage initiation and the MCS fracture can be caused by the imperfect methods of calculating MCS i...
Compressive and tensile strength of reinforced сoncrete with basalt fiber
Nowadays the more often usage of concrete under extreme operating conditions requires invariably improvement of its properties such as: crack, frost, shock resistance and resistance before dynamic loads. It can be realis...
Selecting cutting modes for high-speed titanium-tungsten instruments at cutting pneumatic tires
Results of experimental researches of technical processes of used pneumatic automobile tires utilization are given to determine the most effective cutting tool’s material and cutting mode during their cutting in half.
Propagation of Lamb waves in a pre-stained compressible elastic layer interaction with a layer of an ideal compressible fluid
The problem of acoustic waves propagation in a pre-strained compressible elastic layer that interacts with a layer of ideal compressible fluid is considered. The study is carried out on the basis of the three-dimensional...