Dependences of relative and absolute glazed area from configuration and common areas of window embrasure
Journal Title: Вісник Тернопільського національного технічного університету - Year 2018, Vol 89, Issue 1
Abstract
The article deals with the economy of electric energy, which is spent on room lighting, because of increasing interests of natural light. As a result of the research, there has been obtained an analytical expression for determination of the absolute and relative glazed area of window embrasure of any configuration. This gives an opportunity (taking into account the costs of manufacturing) to choose a rectangular as the main configuration. It has been proved that only on the dependences of glazed area from window embrasure it is possible to come arrive to a decision with an acceptable range of metal-plastic window sizes in terms of providing high natural illumination of the premises
Authors and Affiliations
Mykola Tarasenko, Vitaliy Burmaka, Kateryna Kozak
Keywords
Related Articles
- EP ID EP289613
- DOI 10.33108/visnyk_tntu2018.01.122
- Views 50
- Downloads 0
X-ray phase analysis of metal polymers based on aromatic polyamide
This paper analyzes the structure of metal polymers studied by the method of X-ray analysis. It is shown that introducing metal into the polymer does not directly result in creating new crystallization centers but simply...
Physical-chemical regularities of steel refining from non-metallic inclusions
Using the thermodynamic analysis, the possibility of a colloid interaction of the dispersed phase with a dispersed medium, the possibility of coagulation of the non-metallic phase, has been determined. It is established,...
The influence of corrosive environment on fatigue life of the t-shaped welded joints
The influence of corrosive environment (3% NaCl, high moisture and increased temperature and neutral salt fog and increased temperature) on the characteristics of fatigue resistance of T-welded joints of low alloy struct...
Bend of izotropic plate with two indentical co-axial open cracks at plastic zones meeting between them taking into account the contact of crack banks
A problem of biaxial bending under distributed on infinity moments of isotropic plate with the co-axial cracks of identical length is stated and solved. The vectors of the applied to the plate moments are perpendicular a...
Throughput capability of the combined screw chopper conveyor
Improving existing designs of screw transport mechanisms and justification of their rational parameters and operating modes can significantly improve the performance and reliability of manufacturing operations. Based on...