Numerical and analytical solution of the problem on deformation of the circular cylinder using the Bessel functions
Journal Title: Вісник Тернопільського національного технічного університету - Year 2018, Vol 90, Issue 2
Abstract
The elastic deformation of the plate in the form of a circular cylinder under the action of a smooth stamp contacting with the plate along the entire surface of the upper base is considered. The work deals with the finding of the critical areas of a deformed circular cylinder, undergoing a constant axial deformation under the action of the compressive load. The top of the cylinder is pressed by a smooth, absolutely rigid parabolic stamp that moves vertically and contacts with the entire top of the cylinder. Lower base is free of loads. As a criterion of strength the Mises energy hypothesis is taken. The Eri function is represented in a trigonometric form using the Bessel functions of zero and first order. The analytical formulas for components of the stress tensor for the investigated body of rotation are obtained, as well as the function of the potential energy of the form-change in accordance with the Mises energy hypothesis. The adequacy of the constructed mathematical model is checked by the method of finite elements.
Authors and Affiliations
Tetiana Shtefan, Andriy Zasovenko
Keywords
Related Articles
- EP ID EP373068
- DOI 10.33108/visnyk_tntu2018.02.079
- Views 66
- Downloads 0
Determination of stresses near the cracks in plates on the basis of integral equations relatively the displacement jumps
A calculation algorithm of stresses in the plates with cracks, based on integral equations written relative to the displacement jumps of their faces, is presented. Singular integral equations are constructed by the Muskh...
Research and analysis od the defects of operational the rolling bearings based on the use of lubricants
With the use of the developed laboratory setting, the researches of noise diagnostic characteristicsof the rolling bearings with the useof lubricants by the Peak-factormethod have been conducted and with thecomparison of...
The analysis of the stepping machines constructive features influence on the interaction of the skis supporting surface with ground
The stepping machines constructive features influence on the interaction of the skis supporting surface with ground is analyzed. The comparison is justified with the known stepping mover’s constructive features. It is de...
Influence of thermal heterogeneity on deformation of thin circular cylindrical shell
Thermal deformation of the long cylindrical shell which is taking place in an external temperature field is considered. It is supposed that the material of the shell is heterogeneous, which results in dependence of facto...
Improvement of the stress evaluation using conditive functions
The results of the study of the technical aspects of the problem of human cognitive function-evaluation operator (the human capacity to understand, to learn, understand, perceive and process external information) for the...