Influence of thermal heterogeneity on deformation of thin circular cylindrical shell
Journal Title: Вісник Тернопільського національного технічного університету - Year 2016, Vol 82, Issue 2
Abstract
Thermal deformation of the long cylindrical shell which is taking place in an external temperature field is considered. It is supposed that the material of the shell is heterogeneous, which results in dependence of factor of thermal expansion on angular coordinate θ. Differential equations of the shell thermoelastic deformation are written for the plane case. The solution is constructed as Fourier series on district coordinate. In the case of change of the thermal expansion coefficient in the range of rotational position, analytical expressions are found for the radial and circumferential displacements of the surface points. Numerical studies that allow to determine the nature and the zone of heterogeneity are conducted.
Authors and Affiliations
Maryna Iurchenko
Keywords
Related Articles
- EP ID EP257632
- DOI -
- Views 48
- Downloads 0
Mathematical modeling of interaction of H-polarized electromagnetic wave with a system of thin penetrable inclusions
Using the method of integral equations the mathematical model of interwork between the electromagnetic field of H-polarized plane wave and the system of thin dielectric or little conducting cylindrical embedding has been...
Calculation of constructive parameters of SMA damper
Shape memory alloy (SMA) based damper device is presented in this paper. The device is composed of pre-tensioned SMA wires and two pre-compressed springs which supply tension of the wires. Pre-tensioned SMA wires provide...
Influence of 2,4-diaminotoluene modifier on the physical and mechanical properties of epoxy composite coatings
In the work for the formation of composite material with advanced physical and mechanical properties an epoxy dyanoic oligomer ED-20, a polyethylene polyamine (PEPA) and a modifier of 2,4 – diaminotoluenes were used. The...
The method of dynamic stresses determination of media with tunnel cavities
The method of studying the dynamic stress state of elastic media with tunnel cavities under the non-stationary load as the system of concentrated forces, which are applied in the internal points of media, is developed. O...
Transportation research process bulk material widely universal screw conveyor
Screw transporter has been developed, which consists of the vertical tube-column, to which the horizontal loading branch is fixed rigidly in the upper part being able to revolve, and in the bottom part – the unloading br...