ANALYSIS OF THERMAL STATE OF TRACTION BRUSHLESS PERMANENT MOTOR FOR MINE ELECTRIC LOCOMOTIVE
Journal Title: Електротехніка і Електромеханіка - Year 2016, Vol 0, Issue 6
Abstract
Purpose. The study was conducted to analyze thermal state of the traction permanent magnet synchronous motor for mine electric battery locomotive when operating in continuous and short-time duty modes. These operating modes are selected for study, as they are typical for mine electric locomotives. Methodology. Thermal calculation was performed by means of FEM in three-dimensional formulation of problem using Jmag-Designer. Results. The modeling results of thermal state of the PMSM in continuous and short-time duty operation modes showed good agreement with experimental results. The results showed that the temperature of PM is higher than temperature of the stator winding in continuous operation mode. It was found that PM temperature might reach excessive values because of the high presence of eddy current losses in neodymium PM. Therefore, special attention in the design and testing of PMSM should be paid to the temperature of PM in various operation modes. Practical value. It was recommended to use high temperature permanent magnets in traction PMSM to avoid demagnetization of PM and performance degradation.
Authors and Affiliations
A. V. Matyuschenko
Keywords
Related Articles
- EP ID EP296988
- DOI 10.20998/2074-272X.2016.6.03
- Views 87
- Downloads 0
ON ELECTROSTATIC ANALOGY OF MAGNETOSTATIC FIELD IN INHOMOGENEOUS MAGNETIZED MEDIUM
Purpose. The application in electrostatic analogy of magnetostatics for inhomogeneous magnetized media of two known magnetization models. Methodology. A comparison of basic equations and formulas of electrostatic and mag...
ENERGY LOSS REDUCTION IN SMART GRID UTILITIES FOR ACCOUNT OF TRANSITION FROM SINGLE-PHASE TO THREE-PHASE POWER DISTRIBUTION SYSTEMS
Analytical dependences of such efficiency indices as energy loss power and copper consumption under transition from single-phase power distribution systems to three-phase ones are obtained.
FEATURES OF SELECTION OF CAPACITOR BANKS IN ELECTRIC NETWORKS WITH INTERHARMONIC SOURCES
Purpose. Development of a methodology for selecting capacitor bank parameters designed to compensate for reactive power, if there are sources of interharmonics in the electrical network. Development of a methodology for...
СONDITIONS INVESTIGATIONS OF INDUCTION OF THE "STEADY" PLASMA RING IN THE ELECTRODYNAMIC ACCELERATOR
The numerical investigation of conditions of the "steady" plasma ring induction in the electrodynamic accelerator was made. The influence of a ring resistance on transition of the ring to "steady" state was determined. T...
AN ANALYSIS OF THE ELECTROMAGNETIC PROCESSES IN THE INDUCTOR SYSTEM – TOOL OF THE STRAIGHTENING OF CAR BODIES
Introduction. One of the promising directions of electromagnetic forming (EMF) is a contactless magnetic-pulse straightening of the automobile bodies. The efficiency and the quality of the straightening depend on design...