Analytical and applied model of the process of the cut vegetable components feeding to the screw conveyor of the top gathering module
Journal Title: Вісник Тернопільського національного технічного університету - Year 2018, Vol 90, Issue 2
Abstract
The article deals with the analytical and applied model of feeding of cut vegetable components from root crops to the screw conveyor, the analysis of the theoretical level and possible limits of the change of technological feed of the cutter knives built in the screw conveyor. The advantage of the offered mathematical model in comparison with the traditional one is to take into account such factors as the influence of the hips yield in the row, the specific mass of weeds in the row, the density of the root crops planting, the rate of movement of the root crop harvesting machine.
Authors and Affiliations
Timothii Rybak, Anna Tson, Mykola Stashkiv, Oleg TSON
Keywords
Related Articles
- EP ID EP373083
- DOI 10.33108/visnyk_tntu2018.02.105
- Views 54
- Downloads 0
Biaxial tension of a plate with a Griffiths crack
According to the elastic approach the biaxial loading problem of the plane with an elliptical defect was solved. Using the obtained solution and the deformation approach [1, 3] the solution for the cracked plane under th...
Substantiation of the parameters of hydraulic overload clutch
Creation of new types of machines and mechanisms of transport and technological systems and their drives contributes to further economic development and expansion of the range, increase productivity through the introduct...
Lighting instalations for plants lightculture with additional impulsive radiation
Results of research of plants radiation conditions in enclosed soil are presented in the paper, block diagram of instalation for measuring of energetic parameters of impulsive light sources (luminary) is shown, energysav...
Robust stability and evaluation of the quality functional of linear discrete systems with matrix uncertainty
New methods for analysis of robust stability and optimization of discrete output feedback control systems are developed. Sufficient stability conditions of the zero state are formulated with the joint quadratic Lyapunov...
Analysis of methods of worn car pneumatic tires recycling
The level of utilization of pneumatic tires worldwide does not exceed 10% due to imperfection of these methods. Worn car tires are the source of valuable hydrocarbons, the scrap of alloyed steel and textile material as n...