Analytical and experimental studies into the processes of hydrodynamics and heat exchange in the channels of disk pulse devices
Journal Title: Восточно-Европейский журнал передовых технологий - Year 2019, Vol 4, Issue 8
Abstract
<p>The paper reports an analytical study into the influence of basic parameters of channels in the pulse disk devices on the efficiency of processes of heat exchange and hydrodynamics under the pulse effect on a heat-carrier. A procedure has been proposed for determining basic parameters for the processes of heat exchange and hydrodynamics (flow rate, pressure, a heat-carrier’s temperature) when a liquid is exposed to the pulse effect. Mathematical models have been constructed for the influence of structural and technological parameters of channels in the disk pulse devices on the efficiency of processes of heat exchange and hydrodynamics. Adequacy of the mathematical models has been confirmed by a series of experimental studies involving devices with a single- and multi-step system of the pulse treatment of a heat-carrier. Based on this, we have designed, tested, and implemented industrial structures of the pulse disk heat generators for decentralized heating of buildings for industrial and residential purposes with the single- and two-step pulse influence. The constructed method for a multi-step pulse influence, taking into consideration the results from mathematical modeling, experimentally confirmed and implemented in the structural design of a working chamber in a disk pulse heat generator, has made it possible to improve its energy efficiency by 12 %. We have defined the most efficient geometry for a disk pulse heat generator aimed at its further integration into the system of decentralized heating.</p>A series of experimental studies has been performed, which confirm energy efficiency of the designed devices. One of the designed heat generators with a multistep pulse influence on a heat-carrier has been integrated into a heating system for a shopping mall. Indicators of the heat generator operation meet modern standards of energy efficiency at the level of 0.86‒0.9.
Authors and Affiliations
Valeriy Nikolsky, Ivan Kuzyayev, Oleksandr Alieksandrov, Viktor Ved, Andrii Pugach, Vadim Yaris, Serhiy Ptitsyn, Valerii Lopatin
Keywords
Related Articles
- EP ID EP666979
- DOI 10.15587/1729-4061.2019.174629
- Views 94
- Downloads 0
Construction of a method for predicting the number of enterobacteria in milk using artifical neural networks
<p>It is now established that artificial neural networks (ANNs) provide better simulation and prediction of the number of microorganisms in raw materials and foodstuffs. In this case, ANNs could be used as informative, f...
Iterative hard-decision decoding of combined cyclic codes
<p>We propose error correction iteratively decodable cyclic codes (IDCC) that consist of two cyclic Hamming codes with different generator polynomials. As a mathematical apparatus, we apply the theory of linear finite-st...
Development of new technological solutions for recovery of heavy nonferrous metals from technogenic waste of electroplating plants and sludge of water treatment systems
<p>In galvanic cakes and municipal wastewater sludge, there are significant amounts of heavy non-ferrous metals, which are classified as hazard class I ecotoxicants and are currently being disposed. The existing methods...
Analysis of background and development of technological principles of milk processing by coupsulation
<p class="a">It was proved that milk possesses unique potential as a raw material. It was determined that the most effective way of using the potential of dairy raw materials, in particular the potential of calcium ions,...
Analysis of the preform blowing stage when obtaining a polymeric product using the extrusion blow molding method
<p>It was shown that the process of blowing a polymer preform has two characteristic stages. We obtained analytical dependences that link geometric parameters (diameter, wall thickness) of a molded polymeric preform and...